- Joined
- Feb 26, 2011
- Messages
- 47
- Motherboard
- Gigabyte Z87-UD3H
- CPU
- i7 4770k
- Graphics
- GTX 1060
- Mac
- Mobile Phone
Config.plist is damaged. Did you edit it with TextEdit?
Yes, sorry, i used plistEdit pro this time :
Config.plist is damaged. Did you edit it with TextEdit?
Yes, sorry, i used plistEdit pro this time :
It should still work, i see the two patches in the clover UI, but it does not look like the SSDTs are loading.Your config is still messy.
It should still work, i see the two patches in the clover UI, but it does not look like the SSDTs are loading.
I'll do cleanup of the config once i get usb3 running as well.
SSDTs are not loading because you have so much garbage in the Config your also dropping tables for SSDTs which are not needed neither.
8 series has USB 2.0 controllers at 0x001D0000 and 0x001A0000. USB 3.0 is at 0x00140000.8 doesn't have USB 2 Controller its routed through XHC Controller. Having EHC1, EHC2 in ioreg shows that XHCI is set to Auto instead of Enabled.
8 series has USB 2.0 controllers at 0x001D0000 and 0x001A0000. USB 3.0 is at 0x00140000.
I cleaned up the config, still no usb 3 yet
The controllers are real. Device IDs for the 2 Lynx Point USB 2.0 Controllers are 8c26 and 8c2d. XHC is 8c31.Incorrect. Series 8, 9 and 100 has no USB 2 it is routed through XHCI Controller.
Incorrect. Series 8, 9 and 100 has no USB 2 it is routed through XHCI Controller.