Razer Blade 2016 OSX Sierra

[Silentmoon]

Has anyone managed to hackintosh the Razer Blade 2016 with OSX Sierra to a functioning level of about 90% ? Are there any comprehensive guides for this specific laptop?

 

[Feartech]

Has anyone managed to hackintosh the Razer Blade 2016 with OSX Sierra to a functioning level of about 90% ? Are there any comprehensive guides for this specific laptop?

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Pay attention the Skylake info in the FAQ. It is important. Also read important information regarding UHD screens in the FAQ.

 

[Silentmoon]

@feartech thanks for the response.
I have already gone through the guide and managed to get Sierra working with the IGPU, wifi, bluetooth, and some other features. But I am sill unable to use the audio, HDMI, and trackpad (its working but barely usable).
I was just asking if there was a guide specifically for this laptop, and if anyone has achieved around 90% functionality on this specific laptop. If there is I would love to get their files to give me a boost

 

[Feartech]

@feartech thanks for the response.
I have already gone through the guide and managed to get Sierra working with the IGPU, wifi, bluetooth, and some other features. But I am sill unable to use the audio, HDMI, and trackpad (its working but barely usable).
I was just asking if there was a guide specifically for this laptop, and if anyone has achieved around 90% functionality on this specific laptop. If there is I would love to get their files to give me a boost

Mirone's Audio Patcher:

http://www.insanelymac.com/forum/files/file/496-applehda-patcher/ you will need to know the audio codec

you may have I2C trackpad: download from post 2: https://www.tonymacx86.com/threads/wip-voodooi2c-i2c-trackpad-limited-support.204227/#post-1344206 but you need to know exactly what trackpad you do have so you can check with IORegistry explorer

HDMI, is this video, audio or both?
could be down to SMBIOS you can use macbookpro 11,1 definition, check config.plist from the clover guide linked form post 2

hdmi audio:
https://www.tonymacx86.com/threads/...o-sandy-ivy-haswell-broadwell-skylake.189495/

 

[eddy33]

@Silentmoon
Hi silentmoon, I tried to install Sierra on my razer blade in january but didn't get to the installer. Please can you post some Details. Bios Settings, Bios Version. And did you swap the killer wifi card to a "hackintosh" compatible one?
Thanks

 

[AM0207xx]

@Silentmoon
Hi silentmoon, I tried to install Sierra on my razer blade in january but didn't get to the installer. Please can you post some Details. Bios Settings, Bios Version. And did you swap the killer wifi card to a "hackintosh" compatible one?
Thanks

Create a bootable USB drive with @RehabMan Clover guide. Recommended BIOS settings are also in the guide. You have the possibility to install a mac OS compatible WIFI card, otherwise you can use ethernet instead.
Using your android phone with USB tethering isn´t recommended, because the drivers can break the sleep.

To see the partitions in the mac OS installer you need to put SATA-100-series-unsupported.kext in EFI/Clover/kexts/other, otherwise you won´t see your partitions.

 

[eddy33]

Hello again. I tried all different settings in bios, and made a EFI usb drive with RehabMans guide, but I didn't come to the installer. I tried to boot verbose and it hangs at different points.
Can someone tell me which kexts and which config.plist are the correct. I used the origin RehabMan config.plist for HD530 and only changed the setting for the intel hd530 from 0x19160000 to 0x191b00000. Should I open the laptop and remove the killer wireless card for installing.
In the drivers64 folder is:
AppleImageCodec-64.efi / AppleKeyAggregator-64.efi / AppleUITheme-64.efi /DataHubDxe-64.efi / FirmwareVolume-64.efi / FSInject-64.efi / HFSPlus.efi / OXSAptioFix2Drv-64.efi / OSXFatBinaryDrv.efi / SMCHelper-64.efi / VBoxHfs-64.efi
In the kexts/other folder is only the Sata100-unsupported.kext
Thanks a lot!

 

[Feartech]

Hello again. I tried all different settings in bios, and made a EFI usb drive with RehabMans guide, but I didn't come to the installer. I tried to boot verbose and it hangs at different points.
Can someone tell me which kexts and which config.plist are the correct. I used the origin RehabMan config.plist for HD530 and only changed the setting for the intel hd530 from 0x19160000 to 0x191b00000. Should I open the laptop and remove the killer wireless card for installing.
In the drivers64 folder is:
AppleImageCodec-64.efi / AppleKeyAggregator-64.efi / AppleUITheme-64.efi /DataHubDxe-64.efi / FirmwareVolume-64.efi / FSInject-64.efi / HFSPlus.efi / OXSAptioFix2Drv-64.efi / OSXFatBinaryDrv.efi / SMCHelper-64.efi / VBoxHfs-64.efi
In the kexts/other folder is only the Sata100-unsupported.kext
Thanks a lot!

no Fakesmc in your kexts/other folder?

you should have that in there as per guide, if so and it still doesn't work, then please upload your problem reporting files here

 

[eddy33]

Hi! I downloaded the latest FakeSMC and put it in the kext Folder and tried to boot, but it hangs at the same line. I attached the EFI/Clover Folder and the screenshot.
Thanks

 

[RehabMan]

Hi! I downloaded the latest FakeSMC and put it in the kext Folder and tried to boot, but it hangs at the same line. I attached the EFI/Clover Folder and the screenshot.
Thanks

The image is not legible.

Your profile is not filled out as requested in the FAQ.
Missing:
- screen resolution
- bootloader
- laptop make/model

Please fix as per FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/