macOS Sierra PB: Need testers for new AMD Radeon drivers!

[stehor]

anyone here with 2 monitors on hdmi both flickering.one monitor no flickering rx480 4gb

 

[Revod]

@Revod , try delete Add Properties IntelGfx in Device section, and do injection... and set DarkWake=No

Nope, the same just keep stuck in the bar middle loaded bar.. (I know that because I move the cable again to the mobo and see that and restart the pc to enter normal without injecting)

 

[Sillycorn1]

Will Polaris 10XT2 support RX 480 gpu driver for Mac OS??

 

[jerryy2345]

View attachment 224258

No transparency bar
Horrible acceleration
Said R9 XXX

but how I said before: If I edit the kext = doesn't boot because get stuck the bar
If I add the FakeID too.

Edit: my gpu is connected in the 2th slot because I have a small case and don't space to put in the first PCI Slot. Here:
View attachment 224268

Hello Revod,

The user manual for your board says (page 33):

• Initial Display Output
  Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics.
• IGFX Sets the onboard graphics as the first display.
• PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default)
• PCIe 2 Slot Sets the graphics card on the PCIEX4 slot as the first display.

I am not sure that the RX 480 card is comfortable living in the X4 slot. It might be better off in the X16 slot. (Some cards are lane size compatible, some are not.) Can you take the case off, put the card in slot one and try again?


This is now a fast moving thread. Those relevant AMD controllers and kexts have been updated to version 1.48.16.

 

[jerryy2345]

I made the suggested edits and all works as it did before in 10.12.1. No changes in performance or glitches.

Wondering if there is a way to inject Intel graphics (for boot time and for sleep) without checking the Inject Intel = true box. Currently I'm injecting Intel and ATI (best all-around user experience) and removing Intel injection and rebooting when I need to work in FCPX.

Maybe beta 6 works better...

Remove the Intel key from the inject dictionary and Clover will assume it is set to true. Remember that you set it that way.

Edit: You might be better off having two config.plists and swapping them as needed.

 

[Gigamaxx]

Will Polaris 10XT2 support RX 480 gpu driver for Mac OS??

We will find out as soon as they arrive on shelves. Let's hope they come for the holiday shopping season. Dec 13 is the anticipated announcement by AMD about something, let's get our hopes up, and be ready for disappointment at the same time.

 

[Revod]

Hello Revod,

The user manual for your board says (page 33):

• Initial Display Output
  Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics.
• IGFX Sets the onboard graphics as the first display.
• PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default)
• PCIe 2 Slot Sets the graphics card on the PCIEX4 slot as the first display.

I am not sure that the RX 480 card is comfortable living in the X4 slot. It might be better off in the X16 slot. (Some cards are lane size compatible, some are not.) Can you take the case off, put the card in slot one and try again?


This is now a fast moving thread. Those relevant AMD controllers and kexts have been updated to version 1.48.16.

I move t the PCIEX16 Slot and now are WORKING. I LOVE YOU, That was the problem, seriously, thank you was a noob problem but Never tried that because my case is so small but I just remove everything from the case and adapt to make functional everything (2 hard drive (1tb every hdd) and 2 ssd) is a old case. Thank you to you and to @Gigamaxx to try to help in every reply that I make in every post.

 

[Gigamaxx]

Has anyone tested the Beta 6 yet?

 

[jerryy2345]

I move t the PCIEX16 Slot and now are WORKING. I LOVE YOU, That was the problem, seriously, thank you was a noob problem but Never tried that because my case is so small but I just remove everything from the case and adapt to make functional everything (2 hard drive (1tb every hdd) and 2 ssd) is a old case. Thank you to you and to @Gigamaxx to try to help in every reply that I make in every post.

View attachment 224313

 

[jerryy2345]

Has anyone tested the Beta 6 yet?

Audio still leaves much to the imagination ... as in I imagine one day it will be better. The AMD 9500 controller and 4100 kext have been updated, but I suppose it is to address the glitches being reported on the new MBP.