Have a look hereo - oh.
did i make a mistake ?
yeah just recieved it this week.
in what way will that change the installation process?
Was able to get this hacintosh working finally after 2 weeks of installing, reformatting, rinsing and repeating. Had to follow several guides, but the key was cloning the GUID hard drive to a MBR formatted hard drive (use Carbon Cloner). Then was able to install NVDIA driver and MultiBeast.
Had to patch the kernel on the UniBeast drive and then copy it over first. Must use -v -x npci=0x2000 and nv_disable=1. Have to be in safe mode until you clone to MBR hard drive.
Used apple usb-ethernet dongle to a USB3.0 port and it is working fine. Currently only able to boot in chimera and using MBR formatted SSD.
[video=youtube;yBMfpXt-Wzk]
http://www.tonymacx86.com/yosemite-...motherboard-temporary-guide-os-x-10-10-a.html
http://www.tonymacx86.com/yosemite-...x-gtx-970-ga-x99-ud4-yosemite-hackintosh.html
Was able to get this hacintosh working finally after 2 weeks of installing, reformatting, rinsing and repeating. Had to follow several guides, but the key was cloning the GUID hard drive to a MBR formatted hard drive (use Carbon Cloner). Then was able to install NVDIA driver and MultiBeast.
Had to patch the kernel on the UniBeast drive and then copy it over first. Must use -v -x npci=0x2000 and nv_disable=1. Have to be in safe mode until you clone to MBR hard drive.
Used apple usb-ethernet dongle to a USB3.0 port and it is working fine. Currently only able to boot in chimera and using MBR formatted SSD.
[video=youtube;yBMfpXt-Wzk]
http://www.tonymacx86.com/yosemite-...motherboard-temporary-guide-os-x-10-10-a.html
http://www.tonymacx86.com/yosemite-...x-gtx-970-ga-x99-ud4-yosemite-hackintosh.html
Was able to get this hacintosh working finally after 2 weeks of installing, reformatting, rinsing and repeating. Had to follow several guides, but the key was cloning the GUID hard drive to a MBR formatted hard drive (use Carbon Cloner). Then was able to install NVDIA driver and MultiBeast.
Had to patch the kernel on the UniBeast drive and then copy it over first. Must use -v -x npci=0x2000 and nv_disable=1. Have to be in safe mode until you clone to MBR hard drive.
Used apple usb-ethernet dongle to a USB3.0 port and it is working fine. Currently only able to boot in chimera and using MBR formatted SSD.
[video=youtube;yBMfpXt-Wzk]
http://www.tonymacx86.com/yosemite-...motherboard-temporary-guide-os-x-10-10-a.html
http://www.tonymacx86.com/yosemite-...x-gtx-970-ga-x99-ud4-yosemite-hackintosh.html
So did you just simply install via UNIBEAST only? or did you end up using CLOVER (settings used?)?
Can you please tell me some info?
If so please refer my thread so others may follow
http://www.tonymacx86.com/threads/x...i-yosemite-help-request.196142/#post-1277956\
Thanks.
did you get the 6.3mm headphones jack to work?