Contribute
Register

[solved] on wake up - everything returns to normal (audio, brughtness), the less the display

Status
Not open for further replies.
Yes, intel
It was manufactured hardware item


if I change, I'll lose the warranty of 3 years dell

Your decision, but I doubt they'd be able to tell..

I think in this case we do not have much to do to fix, right?

Pending further testing...
 
other times I had tried all ig-platform-id available for Broadwell
as did a fresh install, I decided to start this process (test all ig-platform-id possible for broadwell) again, since now I have a new smbios (MacbookAir7,2),


testing this ig-platform-id "0x16260006" the sleep / wake work's fine

Hi Rafael,

First of all, thank you!
You may not know, but you've helped me a lot. I always look to your posts, since we have the exactly same machine! Dell 7348, i7 5500U (maybe yours are Brazilian too).

After a week reading, reading and reading the forum, my system is usable, not yet perfect, but usable.
But I'm still facing the sleep problem on El Capitan.
Did I understand right? Using the ig-platform-id = "0x16260006" and SMBIOS = (MacbookAir7,2) solves the problem? Even on El Capitan?
I've tried, with no success, maybe I have to reinstall the whole system with those settings, what do you think?

BTW, could you please share with me your current El Capitan files (CLOVER, DSDTs,...)? So I can compare with mines...

I saw many people with our machine, and there is no specific topic for it, maybe in the future we could start it to help new colleagues.

Thanks in advance!
 
Hi Rafael,

First of all, thank you!
You may not know, but you've helped me a lot. I always look to your posts, since we have the exactly same machine! Dell 7348, i7 5500U (maybe yours are Brazilian too).

After a week reading, reading and reading the forum, my system is usable, not yet perfect, but usable.
But I'm still facing the sleep problem on El Capitan.
Did I understand right? Using the ig-platform-id = "0x16260006" and SMBIOS = (MacbookAir7,2) solves the problem? Even on El Capitan?
I've tried, with no success, maybe I have to reinstall the whole system with those settings, what do you think?

BTW, could you please share with me your current El Capitan files (CLOVER, DSDTs,...)? So I can compare with mines...

I saw many people with our machine, and there is no specific topic for it, maybe in the future we could start it to help new colleagues.

Thanks in advance!


Yes, my dell 7348 are in BraSil.

I can share the clover folder, but it depends of your bios firmware version.
Can you confirm your bios version?

"0x16260006" solved the backlight problem after wake, even on el capitan. Wake problem are related with native CPU/GPU power management too (generated SSDT.aml w/ ssdtPrGen.sh).

i still working with the usb injector for el cap. look: http://www.tonymacx86.com/el-capita...-11-usb-changes-solutions-23.html#post1123988

are you replaced your wifi card?

Abraços.
 
Can you confirm your bios version?

"0x16260006" solved the backlight problem after wake, even on el capitan. Wake problem are related with native CPU/GPU power management too (generated SSDT.aml w/ ssdtPrGen.sh).

i still working with the usb injector for el cap. look: http://www.tonymacx86.com/el-capita...-11-usb-changes-solutions-23.html#post1123988

are you replaced your wifi card?

Bom saber! ;)

My BIOS version is A07.
I generated the SSDT.aml (using your modified ssdtPrGen.sh version).
I haven't replaced the WIFI card yet, I'm still using a RTL8188CU (USB Stick). But I will replace ASAP. I just replaced the HDD to a SSD 850 EVO, as yours...

BTW: What are you trying to fix on El Capitan USB? My USBs seems to be working on El Capitan, even my pen drive 3.0 reaches 250MB/s speed.

Have you applied all the DSDT patches? I extracted my .aml files using the patchmatic...
"Fix _WAK Arg0 v2"
"HPET Fix"
"SMBUS Fix"
"IRQ Fix"
"RTC Fix"
"OS Check Fix"
"Fix Mutex with non-zero SyncLevel"
"Fix PNOT/PPNT"
"Add IMEI"

I saw no difference applying these patches...

Thanks in advance.
 
Bom saber! ;)

My BIOS version is A07.
I generated the SSDT.aml (using your modified ssdtPrGen.sh version).
I haven't replaced the WIFI card yet, I'm still using a RTL8188CU (USB Stick). But I will replace ASAP. I just replaced the HDD to a SSD 850 EVO, as yours...

BTW: What are you trying to fix on El Capitan USB? My USBs seems to be working on El Capitan, even my pen drive 3.0 reaches 250MB/s speed.

Have you applied all the DSDT patches? I extracted my .aml files using the patchmatic...
"Fix _WAK Arg0 v2"
"HPET Fix"
"SMBUS Fix"
"IRQ Fix"
"RTC Fix"
"OS Check Fix"
"Fix Mutex with non-zero SyncLevel"
"Fix PNOT/PPNT"
"Add IMEI"

I saw no difference applying these patches...

Thanks in advance.

are you running El Cap?
 
are you running El Cap?

Yes.
USB Working.
One of the USB 3.0 has my mouse connected.
The other USB 3.0 has my pen drive 3.0 (full speed).
The right side USB (2.0) has my WIFI connected.
 
Yes.
USB Working.
One of the USB 3.0 has my mouse connected.
The other USB 3.0 has my pen drive 3.0 (full speed).
The right side USB (2.0) has my WIFI connected.

BLZ!


View attachment 7348_el_cap.zip

add
*.aml to you EFI/CLOVER/ACPI/patched folder
config.plist to EFI/CLOVER folder
install USBXHCI to your SLE

i have an extra wifi card here (94352z)
 
Hi! Rafael e FCMMac, i have the same laptop as yours, yosemite was running fine, but with elcap i`m having problems with HD5500.
In Yosemite i got it working without messing with bios edition, only with inject intel, IGP id, and clover kext patching.
But with El cap i can`t make it work, do you have any advise?
I can only boot without graphics acceleration.
Do you have any guide to help me or could you share yours EFI folder?
Thanks.
 
Hi! Rafael e FCMMac, i have the same laptop as yours, yosemite was running fine, but with elcap i`m having problems with HD5500.
In Yosemite i got it working without messing with bios edition, only with inject intel, IGP id, and clover kext patching.
But with El cap i can`t make it work, do you have any advise?
I can only boot without graphics acceleration.
Do you have any guide to help me or could you share yours EFI folder?
Thanks.

Did you set DVMT-prealloc to 64mb?
 
Status
Not open for further replies.
Back
Top