RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,016
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
HP Split x2 - Hackintosh Compatibility
Use Clover hotpatch for 5ghz instead of wireless_bcm94352-100.command.
BTFirmwareUploader.kext is known to be buggy and causes instability on wake from sleep. Use BrcmPatchRAM.kext instead: https://github.com/RehabMan/OS-X-BrcmPatchRAM
Audio: best result with patched AppleHDA. There is info on it (and much more) in the FAQ: http://www.tonymacx86.com/yosemite-...faq-read-first-laptop-frequent-questions.html
Battery status: http://www.tonymacx86.com/yosemite-...de-how-patch-dsdt-working-battery-status.html, try "HP G6 2221ss"
Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
Okay, finally have some time to finish the install and try to get everything working. Installed using Clover with the config_HD4600_4400_4200.plist as the config.plist in Clover EFI as well as Rehabman's FakeSMC, VoodooPS2Controller and GenericUSBXHCI kexts. Here is what are working and not working:
Working:
HD4400 with QE/CI: used "FakePCIID_HD4600_HD4400.kext" with "FakePCIID.kext" to get QE/CI, although system report identifies the Graphics as Intel HD Graphics 4200 instead of 4400 as noted in HP website. Everything works though, so oh well. HDMI not yet tested.
Wifi: used "FakePCIID_BCM94352Z_as_BCM94360CS2.kext" as well as the "wireless_bcm94352-100.command" patch to get both 2.4 and 5 ghz working.
Bluetooth: applied "BTFirmwareUploader.kext" to get bt working.
Sound: installed "VoodooHDA" to get sound working through both speakers and headphones, although headphone volume is okay, speaker volume is also low, similar to what Mad Audi Scientist got with his patch. Has yet to test audio through HDMI.
Touch screen works without any modification.
Not Working:
Touchpad: Similar to what Mad Audi Scientist saw on his Split X2,the touchpad is detected in System Report as SynapticsTouch Pad V 1.03U3 but not functioning. I have been using a bluetooth mouse instead.
Battery status: Tried to get it to work with Rehabman's "ACPIBatteryManager.kext" but the battery status after kext installation showed "No Battery Available". I tried to patch DSDT but since I have very little programming background, I was able to disassemble the DSDT and SSDT files. Everything after that just went over my head. Rehabman, I apologize in advance for asking but can you take a look at my disassembled ACPI files to see if you can make a patch for battery status? Your help is greatly appreciated.
Here is the disassembled files:
View attachment 139850
Again, thank you very much for your help
Use Clover hotpatch for 5ghz instead of wireless_bcm94352-100.command.
BTFirmwareUploader.kext is known to be buggy and causes instability on wake from sleep. Use BrcmPatchRAM.kext instead: https://github.com/RehabMan/OS-X-BrcmPatchRAM
Audio: best result with patched AppleHDA. There is info on it (and much more) in the FAQ: http://www.tonymacx86.com/yosemite-...faq-read-first-laptop-frequent-questions.html
Battery status: http://www.tonymacx86.com/yosemite-...de-how-patch-dsdt-working-battery-status.html, try "HP G6 2221ss"
Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.