Contribute
Register

10.10.3 is out

Status
Not open for further replies.
Build 1
DC3217BY |  i3 4150 |  HD 4600
custom-mac said:
I do not see any artifacts during boot. It is still needed in my case? I do see some sizing issue in "System Information" info pane though.
Click to expand...

On what hardware?

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
 
custom-mac said:
HP Probook 4440 with i3-3110M. I did not try it on 4540 with i3-3110M yet. Both 1366x768.
Clover
Click to expand...

I have a 1080p 4540s with Ivy (see signature). The glitching is so minor (with CSM enabled)... hard to tell if the patch is improving it or not. It would probably be more noticed if CSM was not enabled. On my Lenovo u430 the difference is more noticeable (and even more so with CSM disabled).
 
Hi brother
I was update 10,10.2 to 10.10.3 today and now can't boot.
only boot in safe mode.
laptop reboot auto.
sorry for bad english
 
dear Master Rehabman
i was updat 10.10.2 to 10.10.3 today
now can boot without safe mode
hp probook 4540s-clover bootloader
laptop reboot again and again
please help me
 
ostadnart said:
Hi brother
I was update 10,10.2 to 10.10.3 today and now can't boot.
only boot in safe mode.
laptop reboot auto.
sorry for bad english
Click to expand...

Boot verbose to troubleshoot.
 
ostadnart said:
dear Master Rehabman
i was updat 10.10.2 to 10.10.3 today
now can boot without safe mode
hp probook 4540s-clover bootloader
laptop reboot again and again
please help me
Click to expand...

In Clover screen, press F4, then go to Option > Graphics Inject, set FakeID of both Intel and AMD to 0x12345678, then you can booot to OS X normally.

Use latest PBI CE to update your config and dsdt.
 
brother
i can't boot verbose..rebootet auto again.
it only boot in safe mode
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top