- Joined
- Dec 8, 2014
- Messages
- 30
- Motherboard
- ZOTAC EI750
- CPU
- I7 - 4770R (HM87)
- Graphics
- HD 5200
Hello,
I bought the ZOTAC ZBOX IE750 - http://www.tonymacx8...zbox-ie750.html.
It has the following hardware:
CPU - I7 - 4770R
GPU - Intel HD5200 Iris Pro.
Chipset - HM87
Audio - Realtek ALC892-GR
Ethernet - Realtek RTL8111F
WiFi + Bluetooth - Intel AC3160
I used Clover to install the system as described here:
http://www.tonymacx86.com/yosemite-desktop-guides/152780-success-zotac-zbox-ie750.html
I managed using some kext and plist to get the system working with only the Sound, TRIM an the WiFi not working.
I tried using MultiBeast to enable TRIM and install the Sound Drivers.
This is what I chose in MultiBeast:
Drivers:
Realtek ALC8xx
Optional EFI Installed Bootloader Support
Disk
Trim Enabler
10.10.x TRIM Patch
Customize
Basic Boot Options
While "Optional EFI Installed Bootloader Support" and "Basic Boot Options" were chosen because MultiBeast made me (It didn't recognize the bootloader it expected or something like that).
Then I restarted the computer and things went bad.
I got the "No Enter" sign.
I ran Verbose mode to see where it gets stuck:
http://i.imgur.com/9JT0Q6u.jpg
I searched for the "No Sign" error and got this related to the TRIM:
http://www.cindori.o...r-and-yosemite/
Which they say to run recovery and enter the following on the terminal:
cd "/Volumes/Your Disk Name"
touch System/Library/Extensions
kextcache -prelinked-kernel System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K System/Library/Kernels/kernel System/Library/Extensions
I ran it and this is what I got:
http://i.imgur.com/uYuddRf.jpg
Which says something about the Sound Drivers.
Is there anyway to "Undo" the changes by MultiBeast?
Thank You.
I bought the ZOTAC ZBOX IE750 - http://www.tonymacx8...zbox-ie750.html.
It has the following hardware:
CPU - I7 - 4770R
GPU - Intel HD5200 Iris Pro.
Chipset - HM87
Audio - Realtek ALC892-GR
Ethernet - Realtek RTL8111F
WiFi + Bluetooth - Intel AC3160
I used Clover to install the system as described here:
http://www.tonymacx86.com/yosemite-desktop-guides/152780-success-zotac-zbox-ie750.html
I managed using some kext and plist to get the system working with only the Sound, TRIM an the WiFi not working.
I tried using MultiBeast to enable TRIM and install the Sound Drivers.
This is what I chose in MultiBeast:
Drivers:
Realtek ALC8xx
Optional EFI Installed Bootloader Support
Disk
Trim Enabler
10.10.x TRIM Patch
Customize
Basic Boot Options
While "Optional EFI Installed Bootloader Support" and "Basic Boot Options" were chosen because MultiBeast made me (It didn't recognize the bootloader it expected or something like that).
Then I restarted the computer and things went bad.
I got the "No Enter" sign.
I ran Verbose mode to see where it gets stuck:
http://i.imgur.com/9JT0Q6u.jpg
I searched for the "No Sign" error and got this related to the TRIM:
http://www.cindori.o...r-and-yosemite/
Which they say to run recovery and enter the following on the terminal:
cd "/Volumes/Your Disk Name"
touch System/Library/Extensions
kextcache -prelinked-kernel System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K System/Library/Kernels/kernel System/Library/Extensions
I ran it and this is what I got:
http://i.imgur.com/uYuddRf.jpg
Which says something about the Sound Drivers.
Is there anyway to "Undo" the changes by MultiBeast?
Thank You.