- Joined
- Dec 10, 2014
- Messages
- 23
- Motherboard
- GA-H97-D3H
- CPU
- Intel Core i7 4790
- Graphics
- Onboard graphics
- Mac
- Classic Mac
- Mobile Phone
Hello, I'm a first time builder and I've gotten my hackintosh up and running before but then something happened and now I can't get Yosemite to boot no matter what I do!
My build, Intel Core i7-4790
Gigabyte H97-D3H motherboard
Corsair Vengeance DR3 ram (2x8 GB)
What I've tried:
*I've used Unibeast for my USB drive and then Multibeast and do not plan on changing to clover or another bootloader as I'm a beginner.*
- I have went through and re-partitioned my 1TB Seagate Barracuda HDD probably 15 times now trying different things.
- So, when I go and load up the first time (before using Multibeast) it boots up perfectly fine, with the USB in, obviously. So, after going through the initial process of signing up for Yosemite, I use Multibeast and I have tried using EasyBeast, and DSDT Free. DSDT Free has been the only way that I've ever got it to come back on and boot up with. But before booting on, I have a 4k drive which I have to go into terminal to put in the command. Please not that I have to type in PCIRootUID=1 when booting every time. After all of this, I get nothing, every single time except as black screen, and a restart of my machine. This is very, very frustrating and so any help would be greatly appreciated!!
My build, Intel Core i7-4790
Gigabyte H97-D3H motherboard
Corsair Vengeance DR3 ram (2x8 GB)
What I've tried:
*I've used Unibeast for my USB drive and then Multibeast and do not plan on changing to clover or another bootloader as I'm a beginner.*
- I have went through and re-partitioned my 1TB Seagate Barracuda HDD probably 15 times now trying different things.
- So, when I go and load up the first time (before using Multibeast) it boots up perfectly fine, with the USB in, obviously. So, after going through the initial process of signing up for Yosemite, I use Multibeast and I have tried using EasyBeast, and DSDT Free. DSDT Free has been the only way that I've ever got it to come back on and boot up with. But before booting on, I have a 4k drive which I have to go into terminal to put in the command. Please not that I have to type in PCIRootUID=1 when booting every time. After all of this, I get nothing, every single time except as black screen, and a restart of my machine. This is very, very frustrating and so any help would be greatly appreciated!!