Contribute
Register

restart

  1. DevMau5

    Hackintosh Shutdown/Sleep/Reboot issue after bad usb contact

    Hi, Four months ago, I built an hackintosh with the following specs (From Buyer's guide advice) : - Z390 I AORUS PRO WIFI as a MB - Intel Core i7-8700 - Corsair Vengeance LPX 16GO (2*8GO) DDR4 3200MHZ - RX 580 Aorus - EVGA 650 GQ PSU - NZXT X42 cooling system - NZXT Mini ITX case H200i The Mini...
  2. cowcowpod

    Radeon RX570 black screen after wake - RadDeInit doesn't work?

    Hi, I recently got an MSI Armor Rx570, and it works mostly OOB. I know it's a non-reference design, so the ports are different that what MacOS expects, but I have WEG for that. It successfully goes to sleep, but on wake there is no Video output, and the same with other ports. It usually reboots...
  3. threequartersearth

    Solved > System Restarts With Anything Above cpus=6 (High Sierra)

    Hello, I just got High Sierra up and running on my new machine, however I've run into a major issue, which is that my system seems not to be stable unless I use the boot flag cpus=6 (or 1-5). Above 6, or without the flag, the computer will restart after about 30 seconds of being logged in. I...
  4. koolkid831

    OSxAptipFixDrv Error -requested memory exceeds our allocated relocation block

    Previously, I’ve been able to work around this by going to safe mode but recently after getting fed up, I reinstalled High Sierra and wasn’t able to boot up through safe mode anymore without getting rebooted. If I try to boot normally, I get OsxAptipFixDrv as the error. What can I do? Specs...
  5. vcorder07

    Can't shutdown or Restart or Log Out on Mojave

    Hi, I need help with my setup. I can't shut down/restarting/log out. The problem is, whatever option I choose the screen goes black and the only thing I can see is the mouse pointer. I can move the mouse but this process stays likes that until I press the shutdown or restart button. I tried to...
  6. buddhabackpacker

    Solved > Restart/Shutdown/Sleep/Wake/BT/USB - related?

    I based the installation on Stork’s Maximus X guide AND Steve&Bill guide on reddit, but then had to continue trying different options to adjust to the Maximum XI. I also read and reread many posts related to my hardware and High Sierra installation, trying various recommended settings. It...
  7. christto1991

    Internal HDD WD Red 8TB not showing up after reboot HS 10.13.6

    Internal HDD WD Red 8TB not showing up after reboot HS 10.13.6. It Shows up on the first startup of the computer. But then if i restart the computer the HDD disappears. Then for it to show up i have to shut down the computer and then turn off the power supply to the computer and then when i...
  8. synnys

    Z77X-D3H - Your computer was restarted because of a problem - reboots after shutdown

    @P1LGRIM I was hoping you could help me out. I have this build: (config.plist attached) GA-Z77X-D3H | i5 3570 | GTX 970 running 10.13.6, which works fine. But every time I shut down the computer, it automatically reboots and displays "You computer was restarted because of a problem" (The...
  9. vcorder07

    Solved > Can't shutdown or Restart or Log Out on High Sierra

    Hi, I noticed that on High Sierra there is an issue with shut down/restarting/log out the pc. The problem is, whatever option I choose the screen goes black and the only thing I can see is the mouse pointer. I can move the mouse but this process stays likes until I press the shutdown or restart...
  10. tikiss

    USBMSC Identifier (non-unique) after dual boot with windows

    Hi guys, I have had a running Hackintosh quite long, this week I have decided to change the nvme drive (previously it was 250G drive) to 500G and I have cloned my High Sierra to the first partition of the 500G drive, after this process everything worked fine. Then I have installed Win10 on the...
  11. alex.tselekidis

    Shut down and restart problem on Mojave

    I have issues with Mojave sometimes not wanting to boot and it will never shut down or restart. Here is my debug report, if someone could let me know what to do that would be really helpful! These are my specs. Motherboard: Asus Rog Maximus XI Extreme CPU: Intel i9 9900k GFX: Saphire 580...
  12. Ballie

    Hackintosh gpu drivers issue gtx 1080 ti

    #1 Hello there, I've been trying to install my graphics drivers for quite a while now. I've been using the following tutorial: https://www.tonymacx86.com/threads/...er-on-high-sierra-black-screen-panics.234390/ due to the fact that this helped me about a year ago when I build my previous...
  13. DomFree

    High Sierra . Shutdown and restart issues

    Hi, I recently make a fresh install of High Sierra, i change my GPU (Nvidia 1050 for Rx 560) on my HP 6300 i5 SFF. All works fine for the moment, except when i have to shutdown or restart, the computer doesn't shutdown. I try different options of the forum , on solved threads , but the only...
  14. Duzzle10

    i9 build - Kernel Panic on shut down or restart. CPU related? & Bluetooth probs at startup.

    Hi, I built my first Hackintosh yesterday. Gigabyte 7390 Gaming M i9 9900k 8-core MSI Vegs 56 Airboost 16 GB DD4 RAM I/O Gear bluetooth module (in usb 2 port) Nocura Cooler Runs great. Very fast. Two problems: There is no bluetooth at startup so I have to plug in a wired keyboard and mouse...
  15. kjdsajkn

    Kernel Panic While Boot

    Hi, I got a kernel panic during my last reboot which now continues to appear every time I restart. I am not sure why but maybe one of you guys knows? Could this be related to the USB exclusions? *** Panic Report *** panic(cpu 5 caller 0xffffff8000ad84dd): Kernel trap at 0xffffff80010067a0...
  16. nervirasme

    [Solved] Can't restart or shutdown after Clover update

    Hello guys, I need help - I updated my Clover to version 4674 (in preparation for Mojave upgrade), but after that I can't restart or shutdown my computer. First I had a problem of not being able to boot at all, but I resolved that after I saw that everyone is having this problem with latest...
  17. Faslane1969

    Pls help I'm SOOO close. High Sierra. Pls read. Simple fix I think.

    Hi all, so I get the installer made and boot up and go ahead and go through the first install process formatting the drive etcetera Etc and then when it reboots to go into the second phase to do the clean install it gets almost all the way done and then gives me an error message with no...
  18. Semon

    ASUS P8z77-v - powermangement issues - final tweaks - High Sierra 10.13.6

    Hi all, I have OSX 10.16.3 running nicely on the following system, with the exception of a few issues. My hardware specifications are: Asus P8Z77-V (https://www.asus.com/Motherboards/P8Z77V/specifications/) Intel i5-2500k (integrated HD3000 gfx) 16gb Corsair 1600mhz Ram 2x Samsung...
  19. evillagekid

    Random Crashes + Slow USB

    Hi, I'm having issues with my first Hackintosh build. Everything has been up and running for a few months but I'm having some ongoing issues I'm trying to troubleshoot. I went through everything I could myself via the boards, but I was getting a little lost so if anyone knows the answers would...
  20. Liam

    SSD I install El Capitan on isn't showing on Enoch Bootloader after installation restart.

    After a 'successful' installation of El Capitan on my laptop using Enoch Bootloader, it automatically restarts (of course). However when it does restart back into the bootloader, the SSD I installed Mac OS on isnt showing up, only the USB shows. So I can't boot from the SSD to finalize the...
Top