- Joined
- Jun 26, 2012
- Messages
- 4,069
- Motherboard
- Asus Z170 Deluxe
- CPU
- i5-6600K
- Graphics
- GTX 970
- Mac
- Mobile Phone
Hi nomadturk,Hi,
Before of upgrade BIOS to version of 3007 (BIOS 1801), my system was work flawless. But now, after boot the system is freezing. I've shared Config below.
My system;
- Asus Z170 Deluxe
- i7 6700K
- 32 GB RAM
- NVIDIA GTX 680
- OS= Sierra 10.12.3
If this is the config.plist that you used whilst running the 1801 BIOS then it may just be a setting in the BIOS that you've overlooked simply as the new BIOS resets to default parameters. Looking at your config.plist I would remove AsusAICPUPM since this is not needed for Asus 100 series. I would also set inject kexts to Yes rather than Detect.
You could also take a look at your system logs to see if anything stands out at the time of the system freeze.