timohour said:nikstar said:
Just a note...
Be careful cause the above controllers are for LCD Screens only, and can not be used for our screens which are LED screens (clearly stated into the item's description)...
Instead we can use something like this which is supposed to work with LED screens. I am in contact with the seller asking if it is compatible with my LP156WH4(TL)(D1)... I 'll post info here so everybody can take advantage and use his screen (if he doesn't want to sell it.
saltydog4791 said:OMG. These hinge covers. I can't get the bezel back on properly. When I took the bezel off I just maneuvered it around them but now trying to get it back on I just can't get it flush properly. Is there some trick to this? The youtube video clearly glosses over this painful step. Everything else was a relative walk in the park compared to this last step.
I was able to boot into windows no problem and get 1080p. In Lion I just get a black screen once I get past the grey apple logo screen. Not sure what to do now. Any help on the hinge covers or the OS would be greatly appreciated.
Bah humbug!
timohour said:xpamamadeus said:1All 4730s comes with HD+ cable!!
2How to upgrade without any issues if i dont know what fHD screen to choose?
3There its no 4730s model with 1366x768 ress
Its 17" probook not 15" !!
Thx for ur help but it wass al wrong.
My help isn't wrong. Since I already anwser another post about 4730s, your question made me think that there is a 4730s coming with an hd screen. I posted previously that the 4730s can upgrade @1080p screen. If you want to know which screen is combatible open your screen and check on the back side where the connector is located. (it's possible that your connector is located on the left.). After that you can upgrade to any 1080p 40pin left side connector screen you want. Hope this helps
blueking said:As this is a different project in itself, it will not be included in the installer. However, you can simply use the DSDT's from earlier in this thread.
saltydog4791 said:OMG. These hinge covers. I can't get the bezel back on properly. When I took the bezel off I just maneuvered it around them but now trying to get it back on I just can't get it flush properly. Is there some trick to this? The youtube video clearly glosses over this painful step. Everything else was a relative walk in the park compared to this last step.
I was able to boot into windows no problem and get 1080p. In Lion I just get a black screen once I get past the grey apple logo screen. Not sure what to do now. Any help on the hinge covers or the OS would be greatly appreciated.
Bah humbug!