Hello, all.
I could use some help. I'm currently stuck in the installation process.
NOTE: This was working and booted prior.
While Mojave was installing I got a message that Mojave could not be installed on my system. Now I'm getting a message to insert a bootable drive.
"Reboot and Select Proper Boot device or Insert Boot Media in selected Boot device and press a key."
I have the same board and an i7-3770K. I don't think it's a hardware issue. This is what I've done.
1. I updated the BIOS to the Tweakhead version: 12j
2. I created the UniBeast drive (no issues there).
3. I set up the BIOS as instructed in all of the posts
4. I started the installation process via the USB stick
--- Using the Disc Utility from the UniBeast drive I erased a Samsung SSD and set it to Mac Journaled
--- I then initiated the installation process to the SSD
--- The system rebooted and I think there was an issue. I had to tell it where to boot from or the auto boot failed. I got a message asking if the BIOS settings were correct, and it showed my CPU speed and two other options. I'm not sure why this occurred.
--- Then Clover started and the macOS displayed a message that Mojave could not be installed in my system.
Now, when I enter the BIOS, I only have these options to boot from and all of them produce an insert bootable drive message:
- KingstonDT Ultimate G2. Note, when I started I had a UEFI (UEFI: KingstonDT etc...) option for the USB stick, now that no longer displays. I am not sure why.
- MAC OS X
- UEFI: Samsung SSD 860 etc...
- P1: Samsung SSD 860 etc...