UniBeast installer blanks during installation - video attached

[t3yf5g]

SOLVED - UniBeast installer blanks during installation - video attached

I start the installation with these arguments as they have gotten me the farthest.

[COLOR=#000000]PCIRootUID[/COLOR]=0 npci=0x2000 -v GraphicsEnabler=No

Here is a video I recorded showing how far the installer got.
[video]http://wagonerwebworks.com/Video0033.mp4[/video]

My first thought was my Asus 15N wifi card. Took that out and it blanked at the same spot.

This is the hardware that I am using:

• Asus Sabertooth X58
• i7-950 Bloomfield
• G.SKILL DDR3 1600 (6GB)
• GeForce GTX 570

I see a few threads on new Sabertooth boards but nothing was applicable to me.

 

[t3yf5g]

The last line in the video is

AppleRTL8169Ethernet: Ethernet address bc:ae:c5:29:78:ba

 

[samisnake]

i think you need to use the AppleACPIPlatform Rollback, as x58 asus boards cant boot without it.
best to ask someone like eelhead who has/had the board. he knows how to get past it

 

[t3yf5g]

Need 20 posts to PM? Bummer. Is there a download link that I just replace the kext file with?

 

[RehabMan]

Need 20 posts to PM? Bummer. Is there a download link that I just replace the kext file with?

It is in Multibeast. From the MB documentation (you should read it if you haven't already):

System
AppleACPIPlatform Rollback
10.6.8 Rollback for ASUS X58 Systems
Replaces the current AppleACPIPlatform.kext in /System/Library/Extensions with an
patched 10.6.8 AppleACPIPlatform.kext by ErmaC for ASUS X58 motherboards running
OS X Lion 10.7.4 or later.
10.8.1 Rollback for ASUS X58 Systems
Replaces the current AppleACPIPlatform.kext in /System/Library/Extensions with the
10.8.1 version. Required on some non-Gigabyte motherboards.

 

[t3yf5g]

I haven't even made it to the Multibeast steps. I am still trying to get it to boot.

 

[t3yf5g]

i think you need to use the AppleACPIPlatform Rollback, as x58 asus boards cant boot without it.
best to ask someone like eelhead who has/had the board. he knows how to get past it

That rollback file did it. Thanks for the tip.