Unable to install via usb (Sierra).

[solomon587]

Hey guys! I'm not a mac Expert, but my work requires use xCode and Sketch. It's the main thing after that I've decided to install MacOS sierra on my pc. I've used instructions from this site, but meet some troubles.

1. When booting from usb, i'm choose macos - boot stucks on apple logo and that is all.
2. I've read, that my i5-7600 must become fake i5-6700, and change in plist follows:

#FakeCPUID to FakeCPUID
and in key area i've write: 0x0506E3

Then i've get the same with stuck logo screen, but with many info, that end like a: "... system uptime in nanoseconds: 314724599". Screenshot atteched.

Intel core i5-7600
Asus H110M-R
NVIDIA GEFORCE GTX1050TI
DIMM DDR4 4096MB PC17000 2133MHz


Please, if you can, help me solve this problem! Thanks.

 

[BreBo]

@solomon587, please update your profile (personal details) with your build (Motherboard or Model, CPU and Graphics Card).

Profiles need to contain at least your primary system to assist others with helping you.

Try setting SMBIOS > Trust=true in your config.plist
If you use only one stick of RAM try moving it to a different slot.

 

[solomon587]

@solomon587, please update your profile (personal details) with your build (Motherboard or Model, CPU and Graphics Card).


Try setting SMBIOS > Trust=true in your config.plist
If you use only one stick of RAM try moving it to a different slot.

Thank you, now, i've changed the slot, and change smibios parameter. And, I have the apple logo with loading bar for 10 minutes...

 

[BreBo]

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v)

 

[solomon587]

Verbose mode screens

 

[BreBo]

Verbose mode screens

Change XHCI Hand-off to Enabled in your BIOS.

 

[solomon587]

Thanks, it's working! I've finished the installation, install nvidia web package, configurate clover plist for working with him, reboot, and after reboot clover automatically choose macos disk, boot him and stuck on apple logo

 

[solomon587]

Boot with verbose

 

[BreBo]

Boot with verbose

Add slide=0 kernel flag to the Boot Arguments in Clover's config.plist
Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.

If that doesn't work, in addition to the above try using OsxAptioFixDrv-64.efi instead of OsxAptioFix2Drv-64.efi.