[SUCCESS] macOS Sierra 10.12.1 | Gigabyte GA-170X-UD3 Ultra | Intel i7-6700k | GTX 950

[490582309283]

Hi TheFatBear,

I have the same configuration as you: the UD3 and an i7 6700k. I've tried every method I could to try to get audio work and I'm not having any luck. I tried with Multibeast to install the drivers listed on this guide and there are still no audio devices showing up.

I tried all 4 scripts at:
https://github.com/toleda/audio_alc_test/blob/master/audio_cloverALC-1220-120.command.zip
https://github.com/toleda/audio_CloverALC/blob/master/audio_pikeralphaALC-120.command.zip
https://github.com/toleda/audio_RealtekALC/blob/master/audio_realtekALC-120.command.zip
https://github.com/toleda/audio_CloverALC/blob/master/audio_cloverALC-120.command.zip

And each one gave an error. Most were 'no clover files found' but another one gave an error of 'unknown configuration this script may leave your computer in an unknown state' so I quit out.

I've got ethernet working totally fine but I'm trying to help setup this machine at work and audio is a definite must.

Does anyone have any idea how to generate a debug script to see why I can't get audio or have any tips? Would hugely appreciate it.

All I've gone so far is use Unibeast to do a clean install and then Multibeast to install different driver configurations.

 

[doof]

I have a ud3 ultra and I'm having problems with TB3/ usb3.1. After sleep the red usb 3.1 port goes dead and I get continuous log spam about the port error until I reboot. Anyone else notice this? I've tried different usb settings for inject and clockID with no difference. It doesn't matter if there is anything plugged in to the port or not when it sleeps.

default    06:50:52.745916 -0700    kernel    054680.058607 AppleUSBXHCIAR@00000000: AppleUSBXHCI::hardwareException: Error saving state
default    06:50:52.745925 -0700    kernel    054680.058617 AppleUSBXHCIAR@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
default    06:50:52.745991 -0700    kernel    054680.058683 AppleUSBXHCIAR@00000000: AppleUSBXHCIPCI::hardwareException: controller unplugged (regRead32)
default    06:50:52.745996 -0700    kernel    054680.058688 AppleUSBXHCIAR@00000000: AppleUSBXHCI::hardwareException: kUSBStatusControllerNotReady did not clear
default    06:50:52.745999 -0700    kernel    054680.058691 AppleUSBXHCIAR@00000000: AppleUSBHostController::setPowerStateGated: going to state 2 failed with 0xe00002e9
default    06:50:52.846861 -0700    kernel    054680.159538 AppleUSB30XHCIPort@00400000: AppleUSBXHCIPort::powerOn: deadline passed (PORTSC 0x00000000)
default    06:50:52.846870 -0700    kernel    054680.159562 AppleUSB20XHCIPort@00100000: AppleUSBXHCIPort::powerOn: deadline passed (PORTSC 0x00000000)
default    06:50:52.846875 -0700    kernel    054680.159566 AppleUSB20XHCIPort@00200000: AppleUSBXHCIPort::powerOn: deadline passed (PORTSC 0x00000000)
default    06:50:52.846878 -0700    kernel    054680.159571 AppleUSB30XHCIPort@00300000: AppleUSBXHCIPort::powerOn: deadline passed (PORTSC 0x00000000)

 

[unbellver]

Hi, is this guide ok for the z170x-ud3 (not the ultra model)?
I read the specific guide for my exact model but its for advanced users and i am first timer Hackintosh. This guide looks easier and mobos are almost the same (different Realtek and i will use internal hd530 for a while).
First Did the default sierra installation guide and only fail in unibeast options and wasnt able to boot from HD, only from installation USB.
Now i am triying again and wonder if this guide Will lead me to successful installation.
Thanks
PS sorry my English, i think in spanish