- Joined
- Mar 19, 2011
- Messages
- 12
- Motherboard
- GIGABYTE GA-Z77-D3H
- CPU
- NTEL CORE I5 3570K 3.4GHZ 6MB S-1155 IVY
- Graphics
- NVIDIA GeForce GTX 660 Ti 2048 MB
- Mac
- Classic Mac
- Mobile Phone
Hello
Finally after 3 weeks of agony the sound is working, no cracking no bad sound, Green jacket back working as it should, optical and input also works, but not front panel.
My configuration and what i did to get it to work:
GA-Z77-D3H
INTEL CORE I5 3570K 3.4GHZ 6MB S-1155
Corsair Vengeance 16GB (4 x 4GB) DDR3 1600MHz
EFI version: F14
What i did:
1.Used my old i3 hackintosh to buy the mountain lion installation disk
2. Used unibeast to create a usb with the installation files
3. Installed with a normal 500 gb wd caviar green
4. Formated it as mac os extended journaled
5. Downloaded multibeast for mountain lion and installed drivers for network card. Maoljs Atheros drivers
Then for the audio the tricky part i tried a lot of the different solution for vt2021 but not non work except this one:
http://www.osx86.net/view/3041-via_vt2021-2020_applehda.html
I used Kextbeast to install the kexts.
And followed the following thread in the bottom:
I was lasy and used the DSDT he created and it works perfectly on my configuration.
"I got this working on the GA-Z77X-D3H board.
I've had to go through the advanced method.
( DSDT editor and tutorial of usage is here: http://www.olarila.com/forum/viewtopic.php?f=18&t=62 )
The simple method didn't work for me, and neither the HDEF.txt patch (at least not fully).
I was getting "DTGP" is undefined after patching the dsdt in the editor (and with this error the .aml wouldn't compile properly). After some further searches, I found the solution.
I had to add above the "Method (_WAK ...) the following function according to what's stated here on the wiki:
http://osxonthinkpads.wikidot.com/dsdt-edits#toc1
Method (DTGP, 5, NotSerialized)
{
If (LEqual (Arg0, Buffer (0x10)
{
/* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44,
/* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B
}))
{
If (LEqual (Arg1, One))
{
If (LEqual (Arg2, Zero))
{
Store (Buffer (One)
{
0x03
}, Arg4)
Return (One)
}
If (LEqual (Arg2, One))
{
Return (One)
}
}
}
Store (Buffer (One)
{
0x00
}, Arg4)
Return (Zero)
}
If you want to look 'for inspiration purposes' into my dsdt.aml file - you can check it out here: http://cl.ly/IlXJ
I'd suggest you to avoid copy pasting it directly though even if you have the same mainboard. It's better to go through the standard procedure as documented by the original poster."
Finally after 3 weeks of agony the sound is working, no cracking no bad sound, Green jacket back working as it should, optical and input also works, but not front panel.
My configuration and what i did to get it to work:
GA-Z77-D3H
INTEL CORE I5 3570K 3.4GHZ 6MB S-1155
Corsair Vengeance 16GB (4 x 4GB) DDR3 1600MHz
EFI version: F14
What i did:
1.Used my old i3 hackintosh to buy the mountain lion installation disk
2. Used unibeast to create a usb with the installation files
3. Installed with a normal 500 gb wd caviar green
4. Formated it as mac os extended journaled
5. Downloaded multibeast for mountain lion and installed drivers for network card. Maoljs Atheros drivers
Then for the audio the tricky part i tried a lot of the different solution for vt2021 but not non work except this one:
http://www.osx86.net/view/3041-via_vt2021-2020_applehda.html
I used Kextbeast to install the kexts.
And followed the following thread in the bottom:
I was lasy and used the DSDT he created and it works perfectly on my configuration.
"I got this working on the GA-Z77X-D3H board.
I've had to go through the advanced method.
( DSDT editor and tutorial of usage is here: http://www.olarila.com/forum/viewtopic.php?f=18&t=62 )
The simple method didn't work for me, and neither the HDEF.txt patch (at least not fully).
I was getting "DTGP" is undefined after patching the dsdt in the editor (and with this error the .aml wouldn't compile properly). After some further searches, I found the solution.
I had to add above the "Method (_WAK ...) the following function according to what's stated here on the wiki:
http://osxonthinkpads.wikidot.com/dsdt-edits#toc1
Method (DTGP, 5, NotSerialized)
{
If (LEqual (Arg0, Buffer (0x10)
{
/* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44,
/* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B
}))
{
If (LEqual (Arg1, One))
{
If (LEqual (Arg2, Zero))
{
Store (Buffer (One)
{
0x03
}, Arg4)
Return (One)
}
If (LEqual (Arg2, One))
{
Return (One)
}
}
}
Store (Buffer (One)
{
0x00
}, Arg4)
Return (Zero)
}
If you want to look 'for inspiration purposes' into my dsdt.aml file - you can check it out here: http://cl.ly/IlXJ
I'd suggest you to avoid copy pasting it directly though even if you have the same mainboard. It's better to go through the standard procedure as documented by the original poster."