Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

[emax19]

It shouldn't be in both locations. Only one. Where was it originally installed? Did you use a kext installer to install it in /Library/Extensions/? If not, you will have to rebuild the kext cache.

I removed it from the efi/clover/kext/other and now it's working, thank you so much for your help.

 

[Stork]

emax19, please summerize what you did to get your USB 3.0 working with
@pastrychef 's help

 

[emax19]

emax19, please summerize what you did to get your USB 3.0 working with
@pastrychef 's help

Sure thing.

First, I replaced the config.plist in my efi/efi/clover folder with the one attached then I replaced the USBInject kext in
/Library/extensions with the one attached.

Thanks again for the tag team on this. You guys rock!

 

[emax19]

@Stork @pastrychef Hey guys, back with another problem that I am hoping you can help fix. I have no audio outputs visible in the system preferences/sound/options.

 

[Stork]

@Stork @pastrychef Hey guys, back with another problem that I am hoping you can help fix. I have no audio outputs visible in the system preferences/sound/options.

Did you follow the two step MultiBeast run as outlined in the OP?

 

[emax19]

Did you follow the two step MultiBeast run as outlined in the OP?

Yes I did and all that shows is my apple tv in the output, no other options. I will run MultiBeast again and see if that helps.

 

[emax19]

Did you follow the two step MultiBeast run as outlined in the OP?

@Stork I was reading up on the voodoHDA 2.9, is this something that could fix this issue?

 

[Stork]

@Stork I was reading up on the voodoHDA 2.9, is this something that could fix this issue?

Nope. Try running MultiBeastv10.3.0 selecting only the following:

Drivers > Audio > Realtek ALC1220
Build > Install
Don't reboot yet! In the Terminal, execute this command: sudo touch /System/Library/Extensions/
Reboot.​

 

[emax19]

Nope. Try running MultiBeastv10.3.0 selecting only the following:

Drivers > Audio > Realtek ALC1220
Build > Install
Don't reboot yet! In the Terminal, execute this command: sudo touch /System/Library/Extensions/
Reboot.​

I did that, maybe I need to just start from scratch as I obviously didn't follow something correctly.

 

[emax19]

Nope. Try running MultiBeastv10.3.0 selecting only the following:

Drivers > Audio > Realtek ALC1220
Build > Install
Don't reboot yet! In the Terminal, execute this command: sudo touch /System/Library/Extensions/
Reboot.​

@Stork I completely re did the os install according to the writeup and I am still showing no outputs. Any advice?