Contribute
Register

[SOLVED] Yosemite with Gigabyte z97x-sli Config

Status
Not open for further replies.
Joined
Jul 21, 2015
Messages
2
Motherboard
gigabyte z97x-sli
CPU
I7 4790k 4.0ghz 1150
Graphics
Intel
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Gigabyte z97x-sli
Intel I7 4790k 4.0 GHZ 1150
16gb Ram
250 Gb SSD Samsung 850 Evo
Intel Integrated Video, Using VGA currently

Needing solutions for
Mouse Jump, Screen Flicker, and About this mac shows 3mb video. System Freezes. Finger to reboot.


OS 10.10.4
MultiBeast 7.4.0 (1)

Notes:
Reboot is fine. Screen flickers at password.
Bios Settings.
Processor XMP Disabled.
Memory XMP Disabled.
Memory Enhancement settings. Normal
Optimized defaults

This is required to get 10.10.4 to Boot, -x GraphicsEnabler=Yes, PCIRootUID=1

Boots to password. Screen flickers, Login to desktop

Multibeast settings
DSDT Free
Audio Alc1150
disk 3rd party sata
trim enabler 10.10.3 TRIM Patch
graphics intel graphics patch for mixed configurations
misc fakesmc v6.16.1372
misc fakesmc plugins v6.16.1372
network intel appleintele1000e v3.2.4.2
chimera v4.1.0
custom basic boot options
generate cpu states
Graphics Enabler=Yes
Hibernate mode=desktop
Kext dev mode
PIC Root ID Fix
Use KernelCache
customize system definitions Macbook pro 8,1
customize themes tonymacx86 black



Advise?
Michael
 
Yosemite with Gigabyte z97x-sli Config

Welcome to the forums.

VGA isn't supported in OS X. You'll need an HDMI, DVI or DP Digital connection.
Screen flickers and mouse jumps as you are booting in safe mode. No drivers loaded.
Intel graphics patch is for 6/7 series mixed HD3000/4000 1155 sockets - Sandybridge/IvyBridge motherboard/processors. You have an 1150 socket with HD4600 graphics.
Graphics Enabler should be No
IGPEnabler should be Yes (for integrated internal graphics)
You don't need PCIRootUID fix.
System definition for your hardware would be better suited as iMac 14,1.
Add in MultiBeast under Customize > select 1080p Display Mode. If this isn't your native screen resolution you can change it in /Extra/org.chameleon.Boot.plist later.
Ensure Init Display First in the BIOS is set to IGFX.
 
Yosemite with Gigabyte z97x-sli Config

Corrections made per Wildwillow's directions. All problems I was having are solved.

This little Hackintosh smokes.

Thank you for your Help.

Michael
 
Good job and very well documented first post. Enjoy.
 
Status
Not open for further replies.
Back
Top