Contribute
Register

[SOLVED] snowleopard only working with iBoot+ethernet issues

Status
Not open for further replies.
snowleopard only working with iBoot+ethernet issues

If you use iBoot Haswell the problem with the ethernet should go away.
 
snowleopard only working with iBoot+ethernet issues

Going Bald said:
If you use iBoot Haswell the problem with the ethernet should go away.
Click to expand...

well I'm using iBoot Haswell 1.0.1

I'm not pretty sure which driver should I need. MBO specs says "Realtek GbE LAN chip (10/100/1000 Mbit)"
I tried all network drivers from multibeast: doesn't work.

I also tried to use a mountain lion version of multibeast, but the installation fails.
 
snowleopard only working with iBoot+ethernet issues

brunp said:
well I'm using iBoot Haswell 1.0.1

I'm not pretty sure which driver should I need. MBO specs says "Realtek GbE LAN chip (10/100/1000 Mbit)"
I tried all network drivers from multibeast: doesn't work.

I also tried to use a mountain lion version of multibeast, but the installation fails.
Click to expand...

The iBoot Haswell should have drivers for ethernet NIC for your board. Forget any driver from MultiBeast - will not work on your hardware. Forget running MultiBeast at all until you install El Capitan.
 
snowleopard only working with iBoot+ethernet issues

I don't understand what's going wrong. I'm sure I'm using iBoot haswell. (it's the name of the image).

I checked that the ethernet hardware is working by booting on a ubuntu thumb drive.

I really don't see why I have no ethernet interface on OSX (on system preferences /network : I don't have the ethernet connection item ).
 
snowleopard only working with iBoot+ethernet issues

I tried to use an other version of ibooth-haswell (1.0.0 instead of 1.0.1): same result
 
snowleopard only working with iBoot+ethernet issues

I found a PCI ethernet card, plugged into the motherboard. Now ethernet is working on interface en0.

But it still can't log to app store.
"Your computer could not be verified..."

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:14:d1:2c:dd:3d
inet6 fe80::214:d1ff:fe2c:dd3d%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.87 netmask 0xffffff00 broadcast 192.168.1.255
media: autoselect (100baseTX <full-duplex>)
status: active

I think I just have to find a real mac to download el capitan.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top