Contribute
Register

[SOLVED] Many problems on clean install 10.12.4

Status
Not open for further replies.
Here is my new problem reporting package. No backlight control (i haven't changed to patched AppleHDA yet).
 

Attachments

  • cicciomarx v2.zip
    2.4 MB · Views: 86
cicciomarrelli said:
Here is my new problem reporting package. No backlight control (i haven't changed to patched AppleHDA yet).
Click to expand...

Did you reboot after rebuilding cache, such that the Clover patch for AppleBacklight can be applied?
 
OK, now it's working. I just shutted down instead of rebooting and, that's it. Now i tried to get work AppleHDA.kext, i found that my audio card (0a0c and 9c20) are natively supported with appleHDA, but can't do nothing to get them work without VoodooHDA.
 
Last edited:
Big problem. After set up AppleHDA, i got Audio working. But my CPU always stay on max Frequency, and doesn't let me take problem reporting files. I just make with AppleHDA patcher my patched kext, done IRQ fix and layout-id patch on my DSDT and put patch on config.plist. What can i've fault to make this? How i can verify if my ssds are all loaded? Before audio patching all was great.
 
cicciomarrelli said:
Big problem. After set up AppleHDA, i got Audio working. But my CPU always stay on max Frequency, and doesn't let me take problem reporting files. I just make with AppleHDA patcher my patched kext, done IRQ fix and layout-id patch on my DSDT and put patch on config.plist. What can i've fault to make this? How i can verify if my ssds are all loaded? Before audio patching all was great.
Click to expand...

You need to at least attach the EFI/Clover that you're using.
Preferably as many "Problem Reporting" files as you can provide.
 
Ok i solved going in safe mode and restore original AppleHDA.kext. I installed aDummyHda.kext instead, and patched everything correctly. I don't understand why audio doesn't work now.

EDIT: Attached jarvis, explaining problem.
 

Attachments

  • CiccioMarx v3.zip
    2.4 MB · Views: 88
  • Schermata 2017-04-01 alle 19.52.07.png
    Schermata 2017-04-01 alle 19.52.07.png
    309.4 KB · Views: 90
Last edited:
cicciomarrelli said:
Ok i solved going in safe mode and restore original AppleHDA.kext. I installed aDummyHda.kext instead, and patched everything correctly. I don't understand why audio doesn't work now.

EDIT: Attached jarvis, explaining problem.
Click to expand...

Your kextcache output shows no dummyHDA kext installed.
If your codec is ALC283...
ALC283 is the same as my Lenovo u430. You can use AppleHDA_ALC283.kext in my u430 repo...

https://github.com/RehabMan/Lenovo-U430-Touch-DSDT-Patch

Requirements:
- Clover bootloader
- config.plist must have the four AppleHDA patches from my config.plist in the repo (but not the zml.zlib patch)
- AppleHDA.kext must be vanilla
- CodecCommander.kext installed to /S/L/E: https://github.com/RehabMan/EAPD-Codec-Commander
- AppleHDA_ALC283.kext installed to /S/L/E
- rebuild cache following the procedure detailed in the u430 guide: http://www.tonymacx86.com/yosemite-...ideapad-u330-u430-u530-using-clover-uefi.html
- DSDT patches "IRQ Fix" and "Audio Layout 3".
 
Thanks i'll try and report results.
 
RehabMan said:
Your kextcache output shows no dummyHDA kext installed.
If your codec is ALC283...
ALC283 is the same as my Lenovo u430. You can use AppleHDA_ALC283.kext in my u430 repo...

https://github.com/RehabMan/Lenovo-U430-Touch-DSDT-Patch

Requirements:
- Clover bootloader
- config.plist must have the four AppleHDA patches from my config.plist in the repo (but not the zml.zlib patch)
- AppleHDA.kext must be vanilla
- CodecCommander.kext installed to /S/L/E: https://github.com/RehabMan/EAPD-Codec-Commander
- AppleHDA_ALC283.kext installed to /S/L/E
- rebuild cache following the procedure detailed in the u430 guide: http://www.tonymacx86.com/yosemite-...ideapad-u330-u430-u530-using-clover-uefi.html
- DSDT patches "IRQ Fix" and "Audio Layout 3".
Click to expand...

Everything is working properly now, except HDMI audio. What have i to do in addition to config.plist/KextToPatch to get it work?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top