[solved] macOS could not be installed on your computer

[lidroider]

On PHASE 2 when installing this comes up and then restarts.

Shall I continue? Clover says this.

I have same issues, please help me, tell me what did you do to fix it, thanks very much

 

[lidroider]

You dont specify how did you solve the problem. How exactly did you manage to go through the 1st phase avoiding the "macOS could not be installed on your computer" message

Agree with you, I have same issues when install 10.14. Do you have same issues with me. If you fixed it, please tell, what I need to do. Thank you very much

 

[RehabMan]

I have same issues, please help me, tell me what did you do to fix it, thanks very much

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[lidroider]

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

I read some guide, your guide is one in it, and successfully install OSX 10.11 in HP Probook 450G1 in the past. Now I install macOS 10.14 in the laptop. Following your guide I can boot to installer in phase 1. But I like @ImSoka, the PHASE 1 goes quite fast. And the "minute remaining" you say on the guide doesn't appear in my installation. When the progress bar is about 50%, my computer auto reboot. I reboot to clover in USB, then go to mac installer in hard disk and find message "macOS could not be installed on your computer". I tried to follow another guide of you to prevent convert partition to APFS. I want to know exactly what @ImSoka do to go to phase 2. I searched in google and TonyMac but can't find the solution on my case. Please tell me your idea. Thank you very much

 

[RehabMan]

I read some guide, your guide is one in it, and successfully install OSX 10.11 in HP Probook 450G1 in the past. Now I install macOS 10.14 in the laptop. Following your guide I can boot to installer in phase 1. But I like @ImSoka, the PHASE 1 goes quite fast. And the "minute remaining" you say on the guide doesn't appear in my installation. When the progress bar is about 50%, my computer auto reboot. I reboot to clover in USB, then go to mac installer in hard disk and find message "macOS could not be installed on your computer". I tried to follow another guide of you to prevent convert partition to APFS. I want to know exactly what @ImSoka do to go to phase 2. I searched in google and TonyMac but can't find the solution on my case. Please tell me your idea. Thank you very much

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[ldaniel-jmz]

Agree with you, I have same issues when install 10.14. Do you have same issues with me. If you fixed it, please tell, what I need to do. Thank you very much

You can go to my post. It says how i solved it.

 

[lidroider]

You can go to my post. It says how i solved it.

Thanks bro, I recreated USB installer in real Mac a few day ago, and I passed the issues.
The problem can be my USB, the image or the process to make installer

 

[elastik]

Thanks a lot RehabMan for your help. I managed to install the OS. now its time for the post-installation! Thanks!!!!!

How did you fix it? I did everything but I still have this problem. I'm on it since 10 hours .
Could you help me out?