Contribute
Register

[solved] hackintosh restarts when connecting HDMI cable

Status
Not open for further replies.
I use the same plist.
Try to change ig-platform-id to the same as device-id.

I changed mine to 00001659 from 00001b59.

Device-id is preset to this strangely (16590000)

Then if you're lucky and after reboot of course you will see the image all purple on your HDMI output.

From there you can check which connector your HDMI is on and enable it.

Precision :
I don't have to enable *-flag or *-pipe.
only *-enable and *-type (HDMI port was set as DP port)

Good luck ;)
 
valanov said:
I use the same plist.
Try to change ig-platform-id to the same as device-id.

I changed mine to 00001659 from 00001b59.

Device-id is preset to this strangely (16590000)

Then if you're lucky and after reboot of course you will see the image all purple on your HDMI output.

From there you can check which connector your HDMI is on and enable it.

Precision :
I don't have to enable *-flag or *-pipe.
only *-enable and *-type (HDMI port was set as DP port)

Good luck ;)
Click to expand...
I'll try that tomorrow and let you know. Can you share your config file for reference please?
Thanks.
 
Here it is.
I don't know why but today no HDMI sound sadly. weird
 

Attachments

  • config.plist
    12.5 KB · Views: 131
Cool ! You are welcome.

You have sound over hdmi working after reboot ?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top