Contribute
Register

[solved] hackintosh restarts when connecting HDMI cable

Status
Not open for further replies.
Perfect! It works without restarting, it was the framebuffer settings.

Thank you! =)

I assume you changed framebuffer-conX-pipe to 12 (where X is the specific connector used by your HDMI port).

Marking solved.
 
[QUOTE = "RehabMan, post: 1826894, member: 429483"] Suponho que você tenha alterado framebuffer-conX-pipe para 12 (onde X é o conector específico usado pela sua porta HDMI).

Marcação solucionada. [/ QUOTE]
I assume you changed framebuffer-conX-pipe to 12 (where X is the specific connector used by your HDMI port).

Marking solved.
Exactly, I changed to the 3 options.

Such as:
framebuffer-con1-enable=1
framebuffer-con1-pipe=<12 00 00 00>
framebuffer-con2-enable=1
framebuffer-con2-pipe=<12 00 00 00>
framebuffer-con3-enable=1
framebuffer-con3-pipe=<12 00 00 00>
 
[QUOTE = "RehabMan, post: 1826894, member: 429483"] Suponho que você tenha alterado framebuffer-conX-pipe para 12 (onde X é o conector específico usado pela sua porta HDMI).

Marcação solucionada. [/ QUOTE]

Exactly, I changed to the 3 options.

Such as:
framebuffer-con1-enable=1
framebuffer-con1-pipe=<12 00 00 00>
framebuffer-con2-enable=1
framebuffer-con2-pipe=<12 00 00 00>
framebuffer-con3-enable=1
framebuffer-con3-pipe=<12 00 00 00>

You can look at your ioreg to determine which connector is actually used, then eliminate the other two.
 
Hey all,
I have the same problem, I tried all of the solutions mentioned above for adding the conx-pipe for 1, 2 but did not work.
Here are my debug files.
@RehabMan
 

Attachments

  • debug_25618.zip
    2 MB · Views: 57
I assume you changed framebuffer-conX-pipe to 12 (where X is the specific connector used by your HDMI port).

Marking solved.
Hey,
I added the changes as you suggested but still have the same issue.
Here are my debug files.
 

Attachments

  • debug_11027.zip
    2 MB · Views: 74
I solved the issue by changing ig-platform-id then the HDMI screen was purple but no reboot. So I could identify the connector and enable it accordingly.

The thread :

Need help with HDMI output
 
Status
Not open for further replies.
Back
Top