toleda
Moderator
- Joined
- May 19, 2010
- Messages
- 22,834
- Motherboard
- Asus Maximus VII Impact
- CPU
- i7-4770K
- Graphics
- RX 560 + HD4600
- Mac
- Classic Mac
- Mobile Phone
You put the HDMI edit on top of ethernet instead of display Note:guitardude8989 said:So I've managed to get it working after messing around with it for the whole afternoon. I found P0P1 in the DSDT and as per the guide replaced that section of the code with the code provided in this post, from the Generic HDMI Audio section (PEGP lines).
I now have HDMI sound fully working. But now if I run with the new DSDT, I have no Ethernet.
Device (P0P1)
{
Name (_ADR, 0x001E0000)
Device (PEG1)
{
Name (_ADR, 0x00010000)
Device (PEG3)
{
Name (_ADR, 0x00030000)
I suggest you start over. in DSDTSE,
Search PEG3
Replace PEGP
Past the HDMI edit over PEGP. (previously PEG3)