- Joined
- Feb 7, 2012
- Messages
- 26
- Motherboard
- GA-Z68MA-D2H-B3 (rev. 1.3) with 16 Gb 1333Mhz DDR3
- CPU
- Sandy Bridge i5-2500K OC'd to 4.3 GhZ
- Graphics
- Gigabyte GTX 1050ti /w 4Gb vram
- Mobile Phone
I recently updated my Sandy Bridge system to 10.12.4 from 10.10.5 so as to put in a new 1050ti gpu. Straight off the bat my USB3 does not work, because apparently my early series 7 mobo has a Etron EJ168A controller, which is not supporter by either El Cap or Sierra. Anyhow I will go for a USB 3.1 card shortly, so that's not the problem.
The major problem is that Sierra can't sleep. once it goes into sleep, trying to wake it up means a kernel panic and reboot loop. I searched and found something interesting in one of the official apple forums. a loaded kext, no longer in use can interrupt sleep mode. SO I ran the pmset commands to get the following output.
Listed by owning process:
pid 1660(AddressBookSourceSync): [0x00001435000184db] 00:00:25 PreventUserIdleSystemSleep named: "Address Book Source Sync"
Timeout will fire in 1775 secs Action=TimeoutActionTurnOff
pid 121(hidd): [0x000008710009829b] 00:50:36 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968097.3"
Timeout will fire in 837 secs Action=TimeoutActionRelease
Kernel Assertions: 0x4=USB
id=504 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a111000 owner=IOUSBHostDevice
id=505 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a114000 owner=IOUSBHostDevice
id=507 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a112000 owner=Mobile Router
Idle sleep preventers: IODisplayWrangler
I don't know wtf is IODisplayWrangler and it seems IOUSB host device is holding up sleep. what should I do?
have set my system identifier as 12,2 and here is the output of CPU states using power mgmt commands
bash-3.2# cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved
Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x99a950f237
MWAIT C-States.....................: 4384
Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35) : 0x40004
MSR_PLATFORM_INFO..........(0xCE) : 0x100070012100
MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000403
MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414
IA32_MPERF.................(0xE7) : 0x1E75583F3E
IA32_APERF.................(0xE8) : 0x272F01E787
MSR_FLEX_RATIO.............(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.......(0x198) : 0x2B6500002B00
MSR_IA32_PERF_CONTROL......(0x199) : 0x3B00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88300000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x3B3B3B3B
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0xA58000009F40
MSR_PKG_ENERGY_STATUS......(0x611) : 0x141F8318
MSR_PKG_POWER_INFO.........(0x614) : 0x1E002F8
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x1814149400000960
MSR_PP0_POWER_LIMIT........(0x638) : 0xA580
MSR_PP0_ENERGY_STATUS......(0x639) : 0x103A0530
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC3_IRTL.............(0x60a) : 0x8850
MSR_PKGC6_IRTL.............(0x60b) : 0x8868
MSR_PKGC7_IRTL.............(0x60c) : 0x886D
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x99AC0B6FA4
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1600 MHz
CPU Maximum non-Turbo Frequency....: 3300 MHz
CPU Maximum Turbo Frequency........: 5900 MHz
CPU P-States [ (16) 42 43 ]
CPU C3-Cores [ 1 2 ]
CPU C6-Cores [ 1 2 ]
CPU P-States [ (16) 36 42 43 ]
CPU P-States [ (16) 36 41 42 43 ]
CPU C3-Cores [ 1 2 3 ]
CPU C6-Cores [ 1 2 3 ]
CPU P-States [ (16) 34 36 41 42 43 ]
CPU P-States [ (16) 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 32 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 32 33 34 35 36 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 39 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 37 39 41 42 43 ]
CPU P-States [ (16) 23 25 29 31 32 33 34 35 36 37 39 41 42 43 ]
CPU P-States [ (16) 23 25 29 31 32 33 34 35 36 37 38 39 41 42 43 ]
bash-3.2#
What logical steps should I take to rectify the sleep problem?
The major problem is that Sierra can't sleep. once it goes into sleep, trying to wake it up means a kernel panic and reboot loop. I searched and found something interesting in one of the official apple forums. a loaded kext, no longer in use can interrupt sleep mode. SO I ran the pmset commands to get the following output.
Listed by owning process:
pid 1660(AddressBookSourceSync): [0x00001435000184db] 00:00:25 PreventUserIdleSystemSleep named: "Address Book Source Sync"
Timeout will fire in 1775 secs Action=TimeoutActionTurnOff
pid 121(hidd): [0x000008710009829b] 00:50:36 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968097.3"
Timeout will fire in 837 secs Action=TimeoutActionRelease
Kernel Assertions: 0x4=USB
id=504 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a111000 owner=IOUSBHostDevice
id=505 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a114000 owner=IOUSBHostDevice
id=507 level=255 0x4=USB mod=01/01/70, 5:30 AM description=com.apple.usb.externaldevice.1a112000 owner=Mobile Router
Idle sleep preventers: IODisplayWrangler
I don't know wtf is IODisplayWrangler and it seems IOUSB host device is holding up sleep. what should I do?
have set my system identifier as 12,2 and here is the output of CPU states using power mgmt commands
bash-3.2# cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved
Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x99a950f237
MWAIT C-States.....................: 4384
Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35) : 0x40004
MSR_PLATFORM_INFO..........(0xCE) : 0x100070012100
MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000403
MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414
IA32_MPERF.................(0xE7) : 0x1E75583F3E
IA32_APERF.................(0xE8) : 0x272F01E787
MSR_FLEX_RATIO.............(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.......(0x198) : 0x2B6500002B00
MSR_IA32_PERF_CONTROL......(0x199) : 0x3B00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88300000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x3B3B3B3B
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0xA58000009F40
MSR_PKG_ENERGY_STATUS......(0x611) : 0x141F8318
MSR_PKG_POWER_INFO.........(0x614) : 0x1E002F8
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x1814149400000960
MSR_PP0_POWER_LIMIT........(0x638) : 0xA580
MSR_PP0_ENERGY_STATUS......(0x639) : 0x103A0530
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC3_IRTL.............(0x60a) : 0x8850
MSR_PKGC6_IRTL.............(0x60b) : 0x8868
MSR_PKGC7_IRTL.............(0x60c) : 0x886D
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x99AC0B6FA4
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1600 MHz
CPU Maximum non-Turbo Frequency....: 3300 MHz
CPU Maximum Turbo Frequency........: 5900 MHz
CPU P-States [ (16) 42 43 ]
CPU C3-Cores [ 1 2 ]
CPU C6-Cores [ 1 2 ]
CPU P-States [ (16) 36 42 43 ]
CPU P-States [ (16) 36 41 42 43 ]
CPU C3-Cores [ 1 2 3 ]
CPU C6-Cores [ 1 2 3 ]
CPU P-States [ (16) 34 36 41 42 43 ]
CPU P-States [ (16) 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 32 34 35 36 41 42 43 ]
CPU P-States [ (16) 25 31 32 33 34 35 36 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 39 41 42 43 ]
CPU P-States [ (16) 23 25 31 32 33 34 35 36 37 39 41 42 43 ]
CPU P-States [ (16) 23 25 29 31 32 33 34 35 36 37 39 41 42 43 ]
CPU P-States [ (16) 23 25 29 31 32 33 34 35 36 37 38 39 41 42 43 ]
bash-3.2#
What logical steps should I take to rectify the sleep problem?