I ran into the same issue by not changing options in clover install. Normally all is ok but with this version clover seems to change one efi file and does not replace with new one. Like
@Lundli mentioned, it's the
AptioMemoryFix you have to choose. I forgot that and I couldn't boot from any of my USB sticks or anything else. Boot stops at
End Randomseed++++.
Here's a solution how to fix it:
1. Press an arrow key when clover comes up so you stop counting down to boot mac os.
2. Choose
Clover Shell and hit
Enter.
3. Now you should see some
FSX: drives (use PgUp/PgDown to view).
4. You can mount a drive with
map FSX (where X is the number of the drive you want to mount)
5. Step by step mount the drives. You can go to a drive by typing e.g.
FS0:
To change a directory use
cd [dir]
List files with
ls and use command
help to show all commands.
6. One drive should be the EFI drive and one drive with your macos install. Clover does a backup before install (thanks god
) in the root folder of your macos partition.
7. So go to the backup folder in
CLOVER\drivers64UEFI\ and copy the file
OsxAptioFix3Drv-64.efi to the same directory in your EFI drive with command
cp src dst (src=path to
OsxAptioFix3Drv-64.efi; dst=path to destination directory on EFI drive).
8. After that type
exit.
9. YOU MUST REBOOT NOW!
10. Now all is fine and be careful at next clover install... like me
Hope this helps someone...
Update
After that procedure and you install
clover 4586 again (with
AptioMemoryFix-64 enabled!) or next update check out your EFI drive. When you see
AptioMemoryFix-64.efi just delete the old
OsxAptioFix3Drv-64.efi
You should do that before reboot!
Update 2
When you install
clover 4586 again (or later updates) you should also enable
ApfsDriverLoader-64. After that delete
apfs.efi in
..\drivers64UEFI folder on your EFI partition. Also check for new
AptioInputFix-64 or others you enabled. After install You should always have a look at your efi folder before reboot and check for older versions.
This guide is only to fix boot and get back to mac os.
(Thanks to
@MysticalOS and
@remanifest for pointing this out)