- Joined
- Sep 13, 2015
- Messages
- 11
- Motherboard
- AsRock H61M-DGS R2.0
- CPU
- Intel Core i3-3240
- Graphics
- EVGA Geforce GTX 660
This is an edit to clarify my system: I'm attempting to run Yosemite on the system specified in my description to the left. I can't remember what setup I used for multibeast, but that doesn't really matter because I'm not even getting far enough into the boot process for the os to load the drivers. Please help; I can't find any other solution other than restarting from the beginning, and I'd rather not do that.
I turn the computer on, and this appears indefinitely:
Boot 0: GPT
Boot 0: test
Boot 0: test
Boot 0: done_
This is all it shows, no errors. The reason this is so weird is, first, it doesn't display an error, and second, this happens even if I don't have a drive of over 1 TB inside. The boot drive is a 16 GB SSD, with an additional 1 TB hard drive (yes, but wait a minute). When I first installed the hard drive, I restarted the system right after partitioning it for osx use, and it worked fine. I restarted it the next day, and then it started to do this. What's really weird is that, as I previously mentioned, when I disconnected the 1 TB hard drive and tried to start up the system again, it did exactly the same thing.
I turn the computer on, and this appears indefinitely:
Boot 0: GPT
Boot 0: test
Boot 0: test
Boot 0: done_
This is all it shows, no errors. The reason this is so weird is, first, it doesn't display an error, and second, this happens even if I don't have a drive of over 1 TB inside. The boot drive is a 16 GB SSD, with an additional 1 TB hard drive (yes, but wait a minute). When I first installed the hard drive, I restarted the system right after partitioning it for osx use, and it worked fine. I restarted it the next day, and then it started to do this. What's really weird is that, as I previously mentioned, when I disconnected the 1 TB hard drive and tried to start up the system again, it did exactly the same thing.
Last edited: