Contribute
Register

Post Your MultiBeast Config Files Here (.mb)

Joined
Mar 10, 2014
Messages
4
Motherboard
OSX/Windows DualBoot
CPU
Intel i5-4670
Graphics
MSI GTX 760 2GB
Mac
Classic Mac
Mobile Phone
@eftaefta
Any issues? I have a similar build and want to use these configs on mine if so.
 
Joined
Apr 7, 2012
Messages
68
Motherboard
Asus P8Z77-M-Pro
CPU
i5 3570K
Graphics
HD4000
Mac
Mac mini
Classic Mac
iMac
Mobile Phone
Other
MacMini6,1: Asus P8Z77-M Pro - i5 3570K - Intel HD4000 - Mavericks 10.9.2

Multibeast 6.2.1
Added darkwake=8 to Kernel Flags for proper sleep/wake, also ssdt.aml into /Extra for speedstep.
No dsdt.aml is used, as HDMI audio is not needed now.
Install is on a 4K Advanced Format 2TB HD, so "Boot0 Error" fix is applied.
:thumbup: ;) :silent:

Edit: So a couple of days later, and sleep/wake is not working now (cannot wake after monitor goes to sleep, and computer doesn't sleep). Found I had used MB6.1 not 6.2.1 as intended, so not the latest drivers.
With MB 6.2.1 install sleep/wake is working fine (darkwake=8 is not needed now).
 

Attachments

Joined
Mar 2, 2013
Messages
28
Motherboard
GA-Z77X-UP4 TH
CPU
i7-3770k
Graphics
HD 4000
Mac
MacBook Pro, Mac Pro
Classic Mac
iBook
Mobile Phone
Android
Gigabyte GA-Z77X-UP4-TH - i7 3770K - HD 4000 10.9 Mavericks (ofcourse)

View attachment 73169

But after this i use a newer kext for Ethernet. this

The MacPro 3.1 gave me the best Geekbench score. On Mavericks around 16000.
I am using two monitors; an Eizo21" on DVI and a HD monitor on HDMI.
I have the same Mobo as you and have been struggling to get my dual monitor setup to work. It wasn't a problem on ML but since updating to mavericks my HDMI isn't recognised... When the system boots up both monitors display the same (mirrored) screen, and only the DVI monitor shows up in system profiler. So close to giving up and going back to ML. Did you do anything special to get your monitors working? And are you using an extended desktop?

EDIT: It's working now?? I did a clean install, used a combination of yours and Storks Multibeast setup, and it wouldn't boot. I removed the HDA stuff out of chameleon.org.plist and it booted! With both monitors recognised and I now have an extended desktop! I'm happy to not have HDA working as I use an external sound card anyway! I don't know what the problem with HDA was but for now I don't care, I have a fully working Mav setup. :D
 
Joined
May 16, 2011
Messages
38
Motherboard
ASUS Maximus X Hero
CPU
i7-8700K
Graphics
GTX 1080 TI
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Dear Tony,

The Beast works, fine ! 2 question I have to ask :

1. Please give me some instruction about the right order of post installations. (Basics : 10.9.4 by unibeast 4.02, Unibeast 6.4, ga-z97x soc force , 4790k, Killer2200 LAN..., full clean installs)

Normally I do :

- Unibeast by the first boot. (start form the installation media and boot to the OSX hd)

************************************************** *****
Quick Start > DSDT Free
No Audio
Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.9.4 TRIM Patch
Drivers > Misc > FakeSMC v6.8.1307
Drivers > Misc > FakeSMC v6.8.1307 Plugins
Drivers > Misc > FakeSMC v6.8.1307 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Killer™ E2200 1.02
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > IGPEnabler=No
Customize > Boot Options > Use KernelCache
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > iMac > iMac 14,2
Customize > Themes > tonymacx86 Black
************************************************** *****

- Imessage fix in the 2nd boot with system UID and serial alignment.
- PM states fix in the 3rd with SSDT "tweak"
- Personalisation later on . . .

2. I've an issue with LAN (Killer™ E2200) : I lost my LAN connection after few boot finally. (Everything OK, but there is no data transfer on LAN) Somehow DCPIManager show the right LAN information, the system profiler also show every detail. The tricky point is : in System pref. (where also everything looks fine) I cannot edit the IPs, any other settings. I could wrote it in, but 1-2 seconds later the values I entered will go back to default (for example given numbers from DHCP)

I have no clue about the source of the problem probably PM related . . .

1. Do you agree the upper mentioned order of post installation?
2. Do you have any known issues about the mentioned LAN simptome?

THX !!
 
Joined
Nov 8, 2011
Messages
52
Motherboard
Gigabyte Z77X-UD5H
CPU
Core I7 3770K
Graphics
EVGA GTX660
Mac
MacBook Pro
Classic Mac
Mobile Phone
Android
Success OS X Mavericks 10.9.4 Asus P6T-WS Professional
Core I7 920 clocked at 3.8 GHz
WD RE4 1 TB
Seagate 1TB Time capsule
Corsair 12 GB DDR3 triple channel ram
Gigabyte Nvidia GTX660 2048 VRAM
USB 3.0
Bluetooth AZIO
Apple Airport wifi card extracted from laptop and used with mini pcie to pci-e adapter.
Auria WQHD 27" monitor with display port out.
Apple keyboard, USB mouse.

I made my own DSDT.aml file by booting Windows and running the extraction programs. It is included.
I booted system using Unibeast latest with Mavericks on it.
I ran latest multibeast and configured. My mb file is included. Green port for sound, but you can choose many digital outs and by changing voodoo drivers, even get HDMI out.
In the past, most problems in this board were due to use of Radeon graphics IMO and ACPIP platform problems. They are gone now. All works well, fast and boots quickly. Sleep works and recovers well, both lan ports work.

Many socket 1366 CPU's are for sale at low prices and this system can make an excellent machine.
 

Attachments

Joined
Nov 8, 2011
Messages
52
Motherboard
Gigabyte Z77X-UD5H
CPU
Core I7 3770K
Graphics
EVGA GTX660
Mac
MacBook Pro
Classic Mac
Mobile Phone
Android
OS X Mavericks 10.9.4 using latest Multibeast app. I have updated nd attached the multibeast.mb for Asus P6TWS professional, using my dsdt.aml file in the above post. This Multibeast configuration works very well.
 

Attachments

Joined
Jul 20, 2014
Messages
16
Motherboard
GA-Z97P-D3
CPU
i5 4460
Graphics
ASUS GTX 650 2GB
Mac
Mac mini
Classic Mac
Mobile Phone
iOS
My Setup:

CPU = I5 4460
Motherboard = GA-Z97P-D3 (don't think this board is listed on the buyers guide)
Bios = F5
RAM = 8GB Kingston HyperX Fury
GPU = GTX 650 2GB ASUS
Storage = Kingston V300 240GB,

Turn off V-TD and Intel Virtualisation in the Bios

It all installed ok with flags: npci 0x2000 GraphicsEnabler=No (GPU is Kepler)

Working and Stable :)




 

Attachments

Top