Post clover install, crash + screen flicker help.

[0utrunner]

Hi all - hope I can get some help after limping through my clover installation a few weeks ago.

I have had many issues and am overall somewhat disappointed with the final hackintosh result - however - hopefully with the help from this great community some of these issues can be fixed!

system:
z97x ud3h
hyperx fury 16gb ram
intel 4790k
evga gtx 750ti

My latest discovery, in the form of a crash that forced a restart:

panic(cpu 5 caller 0xffffff800041a46e): Kernel trap at 0xffffff800036a945, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000119d25000, CR3: 0x00000003996fd098, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xfdffff802c81c120, RCX: 0xffffff802b266e10, RDX: 0xffffff81c4a12000
RSP: 0xffffff81ede63d50, RBP: 0xffffff81ede63db0, RSI: 0x0fffffffffffffff, RDI: 0xffffff802dd7fa50
R8: 0x0000000000000001, R9: 0xffffff81ede63ee4, R10: 0x00007fffffe00000, R11: 0x00000000000001e9
R12: 0x0000000000000000, R13: 0xfdffff802c81c120, R14: 0xffffff802dd7fa58, R15: 0xffffff802d72b500
RFL: 0x0000000000010002, RIP: 0xffffff800036a945, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000119d25000, Error code: 0x0000000000000000, Fault CPU: 0x5

Item 2:
Sometimes I have my screen flicker black, then black for a second longer, then cuts out to static snow for a minute or two... Anyone know what this is about ??

thanks!

 

[Jithin.C.V]

Please update complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + Screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

It will help others to find the solutions for your issues.

Hi all - hope I can get some help after limping through my clover installation a few weeks ago.

I have had many issues and am overall somewhat disappointed with the final hackintosh result - however - hopefully with the help from this great community some of these issues can be fixed!

system:
z97x ud3h
hyperx fury 16gb ram
intel 4790k
evga gtx 750ti

My latest discovery, in the form of a crash that forced a restart:

panic(cpu 5 caller 0xffffff800041a46e): Kernel trap at 0xffffff800036a945, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000119d25000, CR3: 0x00000003996fd098, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xfdffff802c81c120, RCX: 0xffffff802b266e10, RDX: 0xffffff81c4a12000
RSP: 0xffffff81ede63d50, RBP: 0xffffff81ede63db0, RSI: 0x0fffffffffffffff, RDI: 0xffffff802dd7fa50
R8: 0x0000000000000001, R9: 0xffffff81ede63ee4, R10: 0x00007fffffe00000, R11: 0x00000000000001e9
R12: 0x0000000000000000, R13: 0xfdffff802c81c120, R14: 0xffffff802dd7fa58, R15: 0xffffff802d72b500
RFL: 0x0000000000010002, RIP: 0xffffff800036a945, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000119d25000, Error code: 0x0000000000000000, Fault CPU: 0x5

This is Kernal Panic. It would be better if you can post a photo of the entire screen

Item 2:
Sometimes I have my screen flicker black, then black for a second longer, then cuts out to static snow for a minute or two... Anyone know what this is about ??

thanks!

It may be your Graphics Injection/Driver Issue.

 

[0utrunner]

Thats for the tip Jithin - I intended to fill that out, just forgot!

I'll try to get a more complete screen of that kernel panic issue - that was just a bit from the apple crash report.

as for the graphics issue; I had a good amount of trouble with the 750ti, for any prospective users, I had to physically remove card during installation (disable command was not enough) also disabling the Vd-t and intel visualization graphics in the bios. Once system was working and up, I re-installed card and downloaded the Nvidia driver, all seemed to work, aside from these black/glitchy flickering, my hunch is its related to post sleep and or screensaver...