Contribute
Register

pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

TSXHACK said:
What app do you use to edit?
Click to expand...


I use PlistEdit Pro but you can also use text editors or Xcode.

DO NOT use OpenCore Configurator because there has been a lot of reports that it corrupts config.plists.
 
What should I use for MAC address? When trying to paste my MAC address form my wifi card I get an error.

And what is MLB?
 
pastrychef said:
If you've already done it, yes, you can use the same files/method.

There are several methods that involve SSDT. Two require that USBInjectAll.kext be installed in /EFI/CLOVER/kexts/Other/ and one does not require USBInjectAll.kext. Make sure you follow the method you previously used.
Click to expand...

Hey, my hack has been really stable about a week since fresh install, today it started acting up, does bot boot, keeps getting stuck at apple logo with empty loading bar. Restart does not seem to help, only, when i shut down and boot again, it starts again and "send report" says this:

panic(cpu 0 caller 0xffffff8003e4c32a): Kernel trap at 0xffffff7f8595afab, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000a6c9e384, CR3: 0x000000001d173000, CR4: 0x00000000003626e0
RAX: 0x00000000a6c9e384, RBX: 0x0000000000000002, RCX: 0x0000000000000019, RDX: 0x0000000000000010
RSP: 0xffffff875261bd50, RBP: 0xffffff875261bdf0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0xffffff80a6e546e0, R9: 0x0000000000000000, R10: 0x0000000000000400, R11: 0xffffff80a5876180
R12: 0x0000000000000000, R13: 0x00000000000001e0, R14: 0x0000000000000000, R15: 0x0000000000000003
RFL: 0x0000000000010286, RIP: 0xffffff7f8595afab, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x00000000a6c9e384, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff875261b7b0 : 0xffffff8003d215cd mach_kernel : _handle_debugger_trap + 0x49d
0xffffff875261b800 : 0xffffff8003e5a3c5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff875261b840 : 0xffffff8003e4bf7e mach_kernel : _kernel_trap + 0x4ee
0xffffff875261b890 : 0xffffff8003cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff875261b8b0 : 0xffffff8003d20c97 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff875261b9b0 : 0xffffff8003d21087 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff875261ba00 : 0xffffff80044c2c7c mach_kernel : _panic + 0x54
0xffffff875261ba70 : 0xffffff8003e4c32a mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff875261bbf0 : 0xffffff8003e4c028 mach_kernel : _kernel_trap + 0x598
0xffffff875261bc40 : 0xffffff8003cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff875261bc60 : 0xffffff7f8595afab com.apple.driver.usb.AppleUSBXHCI : __ZN12AppleUSBXHCI11createPortsEv + 0x85d
0xffffff875261bdf0 : 0xffffff7f84a3e363 com.apple.iokit.IOUSBHostFamily : __ZN22AppleUSBHostController31controllerRegisteredGatedPhase1Ev + 0x2f7
0xffffff875261be40 : 0xffffff8004430048 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff875261bea0 : 0xffffff7f84a3e015 com.apple.iokit.IOUSBHostFamily : __ZN22AppleUSBHostController30controllerRegisteredThreadCallEP11thread_call + 0x31
0xffffff875261bec0 : 0xffffff8003d63545 mach_kernel : _thread_call_delayed_timer + 0xec5
0xffffff875261bf40 : 0xffffff8003d63071 mach_kernel : _thread_call_delayed_timer + 0x9f1
0xffffff875261bfa0 : 0xffffff8003cc713e mach_kernel : _call_continuation + 0x2e
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBHostFamily(1.2)[CC813BD5-B83C-3B83-A95E-796D87DE8F81]@0xffffff7f84a2b000->0xffffff7f84b24fff
dependency: com.apple.driver.AppleBusPowerController(1.0)[DEBDD821-1472-371A-896A-BC5C19BD76D0]@0xffffff7f84a11000
dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[A9FB7951-7658-34C4-9A44-0B6DBE6F7F78]@0xffffff7f84a19000
dependency: com.apple.driver.AppleUSBHostMergeProperties(1.2)[19CEF2B0-63C1-34CC-A9CD-BDF842BE5CB3]@0xffffff7f84a27000
com.apple.driver.usb.AppleUSBXHCI(1.2)[08964881-BCC5-3A07-B3CA-DF5B3512B740]@0xffffff7f85948000->0xffffff7f8599ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[9D1FF279-C4A2-3344-902F-E0B22B508689]@0xffffff7f849de000
dependency: com.apple.iokit.IOUSBHostFamily(1.2)[CC813BD5-B83C-3B83-A95E-796D87DE8F81]@0xffffff7f84a2b000
dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[A9FB7951-7658-34C4-9A44-0B6DBE6F7F78]@0xffffff7f84a19000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 debug=0x100 keepsyms=1 -lilubetaall -vsmcbeta -wegbeta -alcbeta -disablegfxfirmware -no_compat_check

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 19.4.0: Wed Mar 4 22:28:40 PST 2020; root:xnu-6153.101.6~15/RELEASE_X86_64
Kernel UUID: AB0AA7EE-3D03-3C21-91AD-5719D79D7AF6
Kernel slide: 0x0000000003a00000
Kernel text base: 0xffffff8003c00000
__HIB text base: 0xffffff8003b00000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 950085099
last loaded kext at 943837232: >!AFileSystemDriver 3.0.1 (addr 0xffffff7f850c1000, size 16384)
loaded kexts:
com.insanelymac.!IMausiEthernet 2.5.0
ru.joedm.SMCSuperIO 1.1.2
as.vit9696.SMCProcessor 1.1.2
as.vit9696.!AALC 1.4.8
as.vit9696.WhateverGreen 1.3.8
ru.usrsse2.SMCBatteryManager 1
ru.usrsse2.SMCLightSensor 1
as.vit9696.VirtualSMC 1.1.2
as.vit9696.Lilu 1.4.3
>!AFileSystemDriver 3.0.1
>!AVirtIO 1.0
@filesystems.hfs.kext 522.100.5
@!AFSCompression.!AFSCompressionTypeDataless 1.0.0d1
@BootCache 40
@!AFSCompression.!AFSCompressionTypeZlib 1.0.0
@filesystems.apfs 1412.101.1
>AirPort.BrcmNIC 1400.1.1
>!AAHCIPort 341.0.2
>!AACPIButtons 6.1
>!ARTC 2.0
>!AHPET 1.8
>!ASMBIOS 2.1
>!AAPIC 1.7
$!AImage4 1
@nke.applicationfirewall 303
$TMSafetyNet 8
@!ASystemPolicy 2.0.0
|EndpointSecurity 1
|IOAudio!F 300.2
@vecLib.kext 1.2.0
|IOSerial!F 11
|IOSurface 269.11
@filesystems.hfs.encodings.kext 1
>!AXsanScheme 3
|IONVMe!F 2.1.0
|IO80211!F 1200.12.2b1
>corecapture 1.0.4
|IOSkywalk!F 1
>!AEthernetAquantiaAqtion 1.0.64
>mDNSOffloadUserClient 1.0.1b8
>usb.!UHostPacketFilter 1.0
|IOUSB!F 900.4.2
|IOAHCI!F 290.0.1
>usb.!UXHCIPCI 1.2
>usb.!UXHCI 1.2
>!AEFINVRAM 2.1
>!AEFIRuntime 2.1
|IOHID!F 2.0.0
$quarantine 4
$sandbox 300.0
@kext.!AMatch 1.0.0d1
|IOSMBus!F 1.1
>DiskImages 493.0.0
>!AFDEKeyStore 28.30
>!AEffaceable!S 1.0
>!AKeyStore 2
>!UTDM 489.101.1
|IOSCSIBlockCommandsDevice 422.101.1
>!ACredentialManager 1.0
>KernelRelayHost 1
>!ASEPManager 1.0.1
>IOSlaveProcessor 1
|IOUSBMass!SDriver 157.101.3
|IOSCSIArchitectureModel!F 422.101.1
|IO!S!F 2.1
|IOUSBHost!F 1.2
>!UHostMergeProperties 1.2
>usb.!UCommon 1.0
>!ABusPower!C 1.0
|CoreAnalytics!F 1
>!AMobileFileIntegrity 1.0.5
@kext.CoreTrust 1
|IOTimeSync!F 840.3
|IONetworking!F 3.4
|IOReport!F 47
>!AACPIPlatform 6.1
>!ASMC 3.1.9
>watchdog 1
|IOPCI!F 2.9
|IOACPI!F 1.4
@kec.pthread 1
@kec.corecrypto 1.0
@kec.Libm 1

I wonder, what could be the cause? I used @pastrychef z370 efi.
Catalina latest update.

Thanks !
PK
 
TSXHACK said:
What should I use for MAC address? When trying to paste my MAC address form my wifi card I get an error.

And what is MLB?
Click to expand...

Don't use your Wi-Fi MAC address. Use the MAC address of your motherboard ethernet.

Go to System Preferences > Network > Ethernet > Advanced > Hardware to find your MAC address. Enter it without the semi-colons.

Major League Baseball
 
Pets123 said:
Hey, my hack has been really stable about a week since fresh install, today it started acting up, does bot boot, keeps getting stuck at apple logo with empty loading bar. Restart does not seem to help, only, when i shut down and boot again, it starts again and "send report" says this:

panic(cpu 0 caller 0xffffff8003e4c32a): Kernel trap at 0xffffff7f8595afab, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000a6c9e384, CR3: 0x000000001d173000, CR4: 0x00000000003626e0
RAX: 0x00000000a6c9e384, RBX: 0x0000000000000002, RCX: 0x0000000000000019, RDX: 0x0000000000000010
RSP: 0xffffff875261bd50, RBP: 0xffffff875261bdf0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0xffffff80a6e546e0, R9: 0x0000000000000000, R10: 0x0000000000000400, R11: 0xffffff80a5876180
R12: 0x0000000000000000, R13: 0x00000000000001e0, R14: 0x0000000000000000, R15: 0x0000000000000003
RFL: 0x0000000000010286, RIP: 0xffffff7f8595afab, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x00000000a6c9e384, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff875261b7b0 : 0xffffff8003d215cd mach_kernel : _handle_debugger_trap + 0x49d
0xffffff875261b800 : 0xffffff8003e5a3c5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff875261b840 : 0xffffff8003e4bf7e mach_kernel : _kernel_trap + 0x4ee
0xffffff875261b890 : 0xffffff8003cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff875261b8b0 : 0xffffff8003d20c97 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff875261b9b0 : 0xffffff8003d21087 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff875261ba00 : 0xffffff80044c2c7c mach_kernel : _panic + 0x54
0xffffff875261ba70 : 0xffffff8003e4c32a mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff875261bbf0 : 0xffffff8003e4c028 mach_kernel : _kernel_trap + 0x598
0xffffff875261bc40 : 0xffffff8003cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff875261bc60 : 0xffffff7f8595afab com.apple.driver.usb.AppleUSBXHCI : __ZN12AppleUSBXHCI11createPortsEv + 0x85d
0xffffff875261bdf0 : 0xffffff7f84a3e363 com.apple.iokit.IOUSBHostFamily : __ZN22AppleUSBHostController31controllerRegisteredGatedPhase1Ev + 0x2f7
0xffffff875261be40 : 0xffffff8004430048 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff875261bea0 : 0xffffff7f84a3e015 com.apple.iokit.IOUSBHostFamily : __ZN22AppleUSBHostController30controllerRegisteredThreadCallEP11thread_call + 0x31
0xffffff875261bec0 : 0xffffff8003d63545 mach_kernel : _thread_call_delayed_timer + 0xec5
0xffffff875261bf40 : 0xffffff8003d63071 mach_kernel : _thread_call_delayed_timer + 0x9f1
0xffffff875261bfa0 : 0xffffff8003cc713e mach_kernel : _call_continuation + 0x2e
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBHostFamily(1.2)[CC813BD5-B83C-3B83-A95E-796D87DE8F81]@0xffffff7f84a2b000->0xffffff7f84b24fff
dependency: com.apple.driver.AppleBusPowerController(1.0)[DEBDD821-1472-371A-896A-BC5C19BD76D0]@0xffffff7f84a11000
dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[A9FB7951-7658-34C4-9A44-0B6DBE6F7F78]@0xffffff7f84a19000
dependency: com.apple.driver.AppleUSBHostMergeProperties(1.2)[19CEF2B0-63C1-34CC-A9CD-BDF842BE5CB3]@0xffffff7f84a27000
com.apple.driver.usb.AppleUSBXHCI(1.2)[08964881-BCC5-3A07-B3CA-DF5B3512B740]@0xffffff7f85948000->0xffffff7f8599ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[9D1FF279-C4A2-3344-902F-E0B22B508689]@0xffffff7f849de000
dependency: com.apple.iokit.IOUSBHostFamily(1.2)[CC813BD5-B83C-3B83-A95E-796D87DE8F81]@0xffffff7f84a2b000
dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[A9FB7951-7658-34C4-9A44-0B6DBE6F7F78]@0xffffff7f84a19000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 debug=0x100 keepsyms=1 -lilubetaall -vsmcbeta -wegbeta -alcbeta -disablegfxfirmware -no_compat_check

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 19.4.0: Wed Mar 4 22:28:40 PST 2020; root:xnu-6153.101.6~15/RELEASE_X86_64
Kernel UUID: AB0AA7EE-3D03-3C21-91AD-5719D79D7AF6
Kernel slide: 0x0000000003a00000
Kernel text base: 0xffffff8003c00000
__HIB text base: 0xffffff8003b00000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 950085099
last loaded kext at 943837232: >!AFileSystemDriver 3.0.1 (addr 0xffffff7f850c1000, size 16384)
loaded kexts:
com.insanelymac.!IMausiEthernet 2.5.0
ru.joedm.SMCSuperIO 1.1.2
as.vit9696.SMCProcessor 1.1.2
as.vit9696.!AALC 1.4.8
as.vit9696.WhateverGreen 1.3.8
ru.usrsse2.SMCBatteryManager 1
ru.usrsse2.SMCLightSensor 1
as.vit9696.VirtualSMC 1.1.2
as.vit9696.Lilu 1.4.3
>!AFileSystemDriver 3.0.1
>!AVirtIO 1.0
@filesystems.hfs.kext 522.100.5
@!AFSCompression.!AFSCompressionTypeDataless 1.0.0d1
@BootCache 40
@!AFSCompression.!AFSCompressionTypeZlib 1.0.0
@filesystems.apfs 1412.101.1
>AirPort.BrcmNIC 1400.1.1
>!AAHCIPort 341.0.2
>!AACPIButtons 6.1
>!ARTC 2.0
>!AHPET 1.8
>!ASMBIOS 2.1
>!AAPIC 1.7
$!AImage4 1
@nke.applicationfirewall 303
$TMSafetyNet 8
@!ASystemPolicy 2.0.0
|EndpointSecurity 1
|IOAudio!F 300.2
@vecLib.kext 1.2.0
|IOSerial!F 11
|IOSurface 269.11
@filesystems.hfs.encodings.kext 1
>!AXsanScheme 3
|IONVMe!F 2.1.0
|IO80211!F 1200.12.2b1
>corecapture 1.0.4
|IOSkywalk!F 1
>!AEthernetAquantiaAqtion 1.0.64
>mDNSOffloadUserClient 1.0.1b8
>usb.!UHostPacketFilter 1.0
|IOUSB!F 900.4.2
|IOAHCI!F 290.0.1
>usb.!UXHCIPCI 1.2
>usb.!UXHCI 1.2
>!AEFINVRAM 2.1
>!AEFIRuntime 2.1
|IOHID!F 2.0.0
$quarantine 4
$sandbox 300.0
@kext.!AMatch 1.0.0d1
|IOSMBus!F 1.1
>DiskImages 493.0.0
>!AFDEKeyStore 28.30
>!AEffaceable!S 1.0
>!AKeyStore 2
>!UTDM 489.101.1
|IOSCSIBlockCommandsDevice 422.101.1
>!ACredentialManager 1.0
>KernelRelayHost 1
>!ASEPManager 1.0.1
>IOSlaveProcessor 1
|IOUSBMass!SDriver 157.101.3
|IOSCSIArchitectureModel!F 422.101.1
|IO!S!F 2.1
|IOUSBHost!F 1.2
>!UHostMergeProperties 1.2
>usb.!UCommon 1.0
>!ABusPower!C 1.0
|CoreAnalytics!F 1
>!AMobileFileIntegrity 1.0.5
@kext.CoreTrust 1
|IOTimeSync!F 840.3
|IONetworking!F 3.4
|IOReport!F 47
>!AACPIPlatform 6.1
>!ASMC 3.1.9
>watchdog 1
|IOPCI!F 2.9
|IOACPI!F 1.4
@kec.pthread 1
@kec.corecrypto 1.0
@kec.Libm 1

I wonder, what could be the cause? I used @pastrychef z370 efi.
Catalina latest update.

Thanks !
PK
Click to expand...

It appears to be due to USB. Try with a minimal number of USB devices connected.
 
I'm trying the OC EFI downloaded here and everything seems to work fine except the GPU sensor is not showing.

Is this normal for VirtualSMC? I have a RX 580 and installed all default plugins come virtualSMC.


Clover+FakeSMC works fine
 
Last edited:
hisea said:
I'm trying the OC EFI downloaded here and everything seems to work fine except the GPU sensor is not showing.

Is this normal for VirtualSMC? I have a RX 580 and installed all default plugins come virtualSMC.


Clover+FakeSMC works fine
Click to expand...

Correct. It's due to VirtualSMC.

I don't know if FakeSMC will work correctly with OpenCore. I've never tried.
 
pastrychef said:
Don't use your Wi-Fi MAC address. Use the MAC address of your motherboard ethernet.

Go to System Preferences > Network > Ethernet > Advanced > Hardware to find your MAC address. Enter it without the semi-colons.

Major League Baseball
Click to expand...

Thanks - inserted the MAC address from the onboard ethernet.

I presume that MLB reference to sport is not a standard argument in the OC config file :)

All the boot errors are gone, but now a new one has come "No Schema for new item 3. (what ever that means?)

Thanks!
 

Attachments

  • Screenshot 2020-04-21 at 16.32.40.png
    Screenshot 2020-04-21 at 16.32.40.png
    284.8 KB · Views: 63
Do you know about this page? https://opencore.slowgeek.com

When I post my config file to this page, I get a lot of errors. What about your config file from your own computer, when you check it at the linked page?
 
TSXHACK said:
Thanks - inserted the MAC address from the onboard ethernet.

I presume that MLB reference to sport is not a standard argument in the OC config file :)

All the boot errors are gone, but now a new one has come "No Schema for new item 3. (what ever that means?)

Thanks!
Click to expand...

"No schema" usually means you left one of the fields blank or entered invalid data.

Main Logic Board
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top