- Joined
- Apr 1, 2017
- Messages
- 420
- Motherboard
- Asus Z370-I
- CPU
- i7-8700
- Graphics
- RX 5700
- Mac
- Mobile Phone
Unfortunately, I need to ask for help because I still don't understand the ssdt-aml bits.
I'm on a Z370-G.
I'm not clear on how to label the excludes. I need the 2 internal standard USB2 headers (1 for the PCIe add-in wifi/BT card, one for a remote poweron button for the PC itself) and I need the 1 internal standard USB3 header (for the front USB3 port on the case); I do not use the M2 USB2 connector (in MacOS) at all, since that's used by the (unused by me) built-in wifi, which doesn't work in MacOS anyway. I think I'm OK on all that. But on the ports on the back of the motherboard, I'm very confused. For example, I need HS09 and HS10, the 2 USB2 ports. And I need all the blue superspeed ports. So do I exclude the "highspeed" versions of all those "superspeed" ports, because I only plan to plug in USB3 peripherals, and if I did ever need to put in a USB2 item I'd put it into either the 2 USB2 ports or into a USB3 hub? Is that how it works?
Then I would INCLUDE: HS11/HS12, HS13/HS14, SS03/SS04, HS09, HS10, SS01, SS02, SS05, SS06
....for a total of just 12 items... which is below the 13 cutoff limit....
and EXCLUDE: HS03, HS04, HS01, HS02, HS05, HS06
Is that how it works?
I'm on a Z370-G.
- I've downloaded the aml file (933 bytes) from the first post and placed it in /EFI/CLOVER/ACPI/patched/
- My "Kernal and Kext patches" has AppleUSBXHCIPCI Find 837D8C10 Replace 837D8C1B Change 15 port limit to 24.... as DISABLED -> Checked
- My existing config.plist has "-lilubetaall -igfxbeta -alcbeta -ngfxbeta shikigva=60" in Boot / Custom Flags; do I put the excludes before or after this?
I'm not clear on how to label the excludes. I need the 2 internal standard USB2 headers (1 for the PCIe add-in wifi/BT card, one for a remote poweron button for the PC itself) and I need the 1 internal standard USB3 header (for the front USB3 port on the case); I do not use the M2 USB2 connector (in MacOS) at all, since that's used by the (unused by me) built-in wifi, which doesn't work in MacOS anyway. I think I'm OK on all that. But on the ports on the back of the motherboard, I'm very confused. For example, I need HS09 and HS10, the 2 USB2 ports. And I need all the blue superspeed ports. So do I exclude the "highspeed" versions of all those "superspeed" ports, because I only plan to plug in USB3 peripherals, and if I did ever need to put in a USB2 item I'd put it into either the 2 USB2 ports or into a USB3 hub? Is that how it works?
Then I would INCLUDE: HS11/HS12, HS13/HS14, SS03/SS04, HS09, HS10, SS01, SS02, SS05, SS06
....for a total of just 12 items... which is below the 13 cutoff limit....
and EXCLUDE: HS03, HS04, HS01, HS02, HS05, HS06
Is that how it works?