OS X 10.9.1 Update

[slann303]

Article: OS X 10.9.1 Update

any one try this update?

Updated it through the Appstore app. Had to re-install audio (as expected). Other than that, my Ivy-Bridge system runs smooth!

 

[tonymacx86]

Article: OS X 10.9.1 Update

Will there be a UniBeast update for this? Or does the current UniBeast work with this?

Current UniBeast works with the updated 10.9.1 App.

 

[VioletDragon]

Mine went thru the update with no issues from the app store all i had to do was re-install the sound kext from multi beast but it went through with no issues I'm happy

 

[email2011]

Article: OS X 10.9.1 Update

Worked perfectly on my rig!

Here's the step by step way to update:

Repair Permissions using the Disk Utility on the drive to be updated;*
Use the Software Update to download and install 10.9.1;
Before re-booting, run MultiBeast v6.01+ and just select your audio driver;
Re-boot; and
Repair Permissions again.​

* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:

sudo diskutil repairPermissions /

 

[Cesarson124]

My Ivy Bridge mackintosh updated just fine from the app store. Just needed to reinstall my audio drivers from Multibeast and I'm good to go!

 

[hokkie]

Installed with regular AppStore update
no problem whatsoever.

Installed on:
- P5B Deluxe (with E8400)
- OSX Server 10.9

 

[email2011]

Article: OS X 10.9.1 Update

Worked perfectly on my rig!

Here's the step by step way to update:

Repair Permissions using the Disk Utility on the drive to be updated;*
Use the Software Update to download and install 10.9.1;
Before re-booting, run MultiBeast v6.01+ and just select your audio driver;
Re-boot; and
Repair Permissions again.​

* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:

sudo diskutil repairPermissions /

 

[madman1234]

After the update it asked again for my iCloud Account. Skipped it and then everything was ok.

Clover, GA-Z77X-UD5H, GTX 650

 

[Kapaaian]

Question. When reinstalling the audio drive, if during install, I did a dsdt (with the driver w/dsdt), when reinstalling after point update, do I need to do the dsdt and audio driver again, or driver w/o dsdt only? I swear I did driver w/o dsdt once and it blew things up.

 

[jk2309]

updated to 10.9.1.

No issue found so far.

Enthernet and TRIM works without re-patching.

(Refer to my build list for my PC spec)