OS X 10.8.5 Update

[jojo007]

10.8.5 on MSI Z77A GD55

Hi,

Update 10.8.4 -> 10.8.5 on MSI Z77A GD55 (BIOS 1.10 not patched), i7 3770, GeForce 760 and VIA FireWire. No DSDT!

OK after install AppleHDA "ALC892_noDSDT_ML10.8.5_Final" and very important, patch native (locked wrmsr BIOS AppleIntelCPUPowerManagement.kext v214.0.0 with "AICPMPatch" (Perl Script).
NOT Use patched AppleIntelCPUPowerManagement.kext on MultiBeast 5.4.3 (wrong version 196.0.0), cause "kernel panic"

GenericUSBXHCI not installed (USB3 only work with USB3 drive, USB2 OK)

Use Chameleon bootloader v2.2 2262
bootflag : GraphicsEnabler=No dart=0

Work fine. Sleep, restart and PowerOff OK. (sorry for my English)

 

[Esp-Legend]

I updated from 10.8.4 to 10.8.5 with the combo update it works fine. But i installed à wrong file zo i did go to the time machine and set it back to the 10.8.5 the new 10.8.5 has à problem with the time machine Any of you have the Same problem my systeem is stUck @ the apple logo and boot over 200 times the Same over and over.

so i set it back to 10.8.4 and it works fine so the new update had à bug!

if Any had the ansar for the problem Plz.

 

[groslight]

Article: OS X 10.8.5 Update

hey JOJO always have the same issue with this update i try fresh install with it about 9 times always haven this screeen in verbose mode i tried a lot of differnt multibeast configs but always the same problem i think i need do to like you with appleintelcpupowermanagement but dont know where to find the kext do you have an idea please? i think it's the last install i will try before i make a new fresh instal with 10,8,4 again

thx

this config:

ga z77 ds3h
i5 3750k
vengence 8 go 1600
wd hdd 750 go
intel graphics 4000

alreadybuilt
the "Yak"

i7 3750k
p8z77 m asus
16go gskill
ssd 120 kingston
intelll graphics
ml 10,8,4


UPDATE NEVERMIND ILL TRY NEW MUTLTIBEST WHEN IT be OUT

 

[Stork]

Article: OS X 10.8.5 Update

groslight,
I, too, have a GA-Z77-DS3H / HD4000. MultiBeast options are drop dead simple. On a fresh install, just choose:

UserDSDT or DSDT-Free Installation
Drivers & Bootloaders > Drivers

Audio > Without DSDT > ALC887
Network > Atheros - Shailua's ALXEthernet​

If you're updating, see my Post #2 which calls for using MultiBeast to just update the audio driver.

Finally, see page 3 in the MultiBeast Features document which comes with the MultiBeast zip. Or at the MultiBeast.com site (a best kept secret).

Unfortunately, for the MSI, ASRock and Asus owners...well, talk amongst yourselves.

 

[groslight]

Article: OS X 10.8.5 Update

thanks for your help Stork
i asked this cause i tried about 6 times the install with the mutlibeast settings you said but never works i done the install using new unibeast and the new 10,8,5 version of ml
many hours left on that new config and my wife is getting crazy with me lol
so i think i will wait untill the new multibeast wiil come
thanks for help
respect for all the team here

 

[mareko2]

Article: OS X 10.8.5 Update

Note for users with OSX on SSD drives:

If you are getting random freezes after updating to 10.8.5, update your SSD drive firmware.

Random freezes have stopped completely after updating my Samsung 840 Pro SSD firmware.
My SSD is connected to PCI-E SATA 3 card with ASM1061 controller.

 

[adamsmasher]

Article: OS X 10.8.5 Update

Note for users with OSX on SSD drives:

If you getting random freezes after updating to 10.8.5, update your SSD drive firmware.

I haven't had any issues with my Sandisk Extreme (same as recommended in the Buyer's Guide). What SSD are you using?

 

[keithh143]

I used "Stork's" guilde.
all was fine until I repaired perditions and rebooted for the 2'ed time.
after that can't boot up.

 

[jojo007]

Article: OS X 10.8.5 Update

hey JOJO always have the same issue with this update i try fresh install with it about 9 times always haven this screeen in verbose mode i tried a lot of differnt multibeast configs but always the same problem i think i need do to like you with appleintelcpupowermanagement but dont know where to find the kext do you have an idea please? i think it's the last install i will try before i make a new fresh instal with 10,8,4 again

thx

this config:

ga z77 ds3h
i5 3750k
vengence 8 go 1600
wd hdd 750 go
intel graphics 4000

alreadybuilt
the "Yak"

i7 3750k
p8z77 m asus
16go gskill
ssd 120 kingston
intelll graphics
ml 10,8,4

UPDATE NEVERMIND ILL TRY NEW MUTLTIBEST WHEN IT be OUT

Hi Groslight,

See my attachment for native AppleIntelCPUPowerManagement.kext v224.0.0 patched (work for me with MSI Z77A GD55 Board and i7 3770).

After Update ML 10.8.5,
I installed "NullCPUPowerManagement.kext", bootflag : -v -x -f, with Unibeast USB Key to boot on my HardDrive without "Kernel Panic".

MultiBeast 5.4.3 -> Install NullCPUPowerManagement --> boot normaly

Then I patch (install for you ex:Kext wizard) "AppleIntelCPUPowerManagement.kext" and delete​ "NullCPUPowerManagement.kext".
Update kext Kernel Cache​ (sudo touch /Sytem/Library/Extensions)
Repair permissions.

Work fine on reboot.

.

 

[mareko2]

Article: OS X 10.8.5 Update

I haven't had any issues with my Sandisk Extreme (same as recommended in the Buyer's Guide). What SSD are you using?

I am using Samsung 840 Pro SSD.