OpenCore stuck at boot (trackpad/keyboard wont work)

[pascontz]

Hello

I tried to install Monterey but stuck in a black screen with the mouse/keyboard blinking and trackpad/keyboard not working.

System Info: ASUS C434 Chromebook, M3-8100Y, 4GB RAM, 64GB eMMC

results off "sudo dmesg | grep -i input"

[ 0.500295] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.500471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.522617] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.352342] input: PNP0C50:00 0457:157E Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:0457:157E.0001/input/input3
[ 1.359393] hid-generic 0018:0457:157E.0001: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 0457:157E] on i2c-PNP0C50:00
[ 4.178841] input: Tablet Mode Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/PNP0C09:00/GOOG0006:00/input/input5
[ 4.306575] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input6
[ 4.403106] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0000:00/input/input8
[ 4.467644] input: PNP0C50:00 0457:157E as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:0457:157E.0001/input/input9
[ 4.476299] hid-multitouch 0018:0457:157E.0001: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 0457:157E] on i2c-PNP0C50:00
[ 4.563673] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input11
[ 4.987444] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 12.358967] rfkill: input handler disabled

I think the VodooI2C kexts are the right one, but nothing will work for me.

Any help? Thanks!

 

[Feartech]

Hello

I tried to install Monterey but stuck in a black screen with the mouse/keyboard blinking and trackpad/keyboard not working.



results off "sudo dmesg | grep -i input"

I think the VodooI2C kexts are the right one, but nothing will work for me.

Any help? Thanks!

your CPU and GPU is not supported

 

[pascontz]

your CPU and GPU is not supported

Really? The Mi Air 12.5 should works and the hardware is almost the same.

GitHub - stryses/Mi-Laptop-Air12.5-8100Y-Hackintosh: Macintosh Setting & Kext package of the laptop Xiaomi-Air12.5(2019)-8100Y

Macintosh Setting & Kext package of the laptop Xiaomi-Air12.5(2019)-8100Y - stryses/Mi-Laptop-Air12.5-8100Y-Hackintosh

github.com

 

[Feartech]

Really? The Mi Air 12.5 should works and the hardware is almost the same.

GitHub - stryses/Mi-Laptop-Air12.5-8100Y-Hackintosh: Macintosh Setting & Kext package of the laptop Xiaomi-Air12.5(2019)-8100Y

Macintosh Setting & Kext package of the laptop Xiaomi-Air12.5(2019)-8100Y - stryses/Mi-Laptop-Air12.5-8100Y-Hackintosh

github.com

ahh ok, yes the AmberLake is similar to the kabylake, that should be fine

 

[pascontz]

I‘ve tried the efi from the link above but now im stuck at the apple boot logo for 5min, then it restarts…

 

[UtterDisbelief]

I‘ve tried the efi from the link above but now im stuck at the apple boot logo for 5min, then it restarts…

We can't offer support for an EFI from another web-site.

From the symptoms you describe the most likely reason for your problem is a non-supported CPU.

Your config.plist does not have a CPU spoof in it, which it would need to boot at all. (Check the Cpuid1Data value).

You also have 2x dummy Embedded controllers defined in your ACPI folder when you need only 1x.

Check your Voodoo kexts.

 

[Feartech]

I‘ve tried the efi from the link above but now im stuck at the apple boot logo for 5min, then it restarts…

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

if you do have an Asus laptop, then not sure how a Xiaomi Air EFI will help

 

[pascontz]

Ok now im in the installer, but there is not HDD to choose...

 

[Feartech]

Ok now im in the installer, but there is not HDD to choose...

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

 

[MacMac1908]

Amazes me that people have said this is an unsupported CPU and GPU, Kabylake Mobile CPU's are Supported and the GPU is a UHD 615 which is also supported, the trackpad however is ELAN based and a quirky one as well and doesnt play nice with any driver out there, plus this is a chromebook not a laptop, further more the internal HDD is eMMC which will not work under any version of macOS, so pretty much a waste of time unless you plan to boot from an external drive.