- Joined
- Jul 1, 2015
- Messages
- 19
- Motherboard
- Asus Strix Z390-F Gaming
- CPU
- Core i9-9900k
- Graphics
- Aorus RTX 2080 Super
Hi Guys,
I recently just bought a new pc but i am unable to get the installer usb working. I have changed all the correct settings for BIOS stated in a few tutorials and have also followed the right steps within a few tutorials.
The problem is that the apple logo gets a full bar then just stops, in -v mode it stops at certain line (See pic below).
I have tried default plist file and some settings people have suggested but nothing that is specfic to my hardware. I have also tried with and without dGPU.
Any help is appreciated!
PC Specs:
Motherboard:ASUS Z390-F Gaming
CPU: Core I9 9900k at 5ghz
Ram: Corsair Vengeance RGB PRO - 32gb 3200mhz DDR4
GPU:AORUS RTX 2080 Super
SSD: Samsung 970 Evo Plus - 500gb
Error:
I recently just bought a new pc but i am unable to get the installer usb working. I have changed all the correct settings for BIOS stated in a few tutorials and have also followed the right steps within a few tutorials.
The problem is that the apple logo gets a full bar then just stops, in -v mode it stops at certain line (See pic below).
I have tried default plist file and some settings people have suggested but nothing that is specfic to my hardware. I have also tried with and without dGPU.
Any help is appreciated!
PC Specs:
Motherboard:ASUS Z390-F Gaming
CPU: Core I9 9900k at 5ghz
Ram: Corsair Vengeance RGB PRO - 32gb 3200mhz DDR4
GPU:AORUS RTX 2080 Super
SSD: Samsung 970 Evo Plus - 500gb
Error: