No Sound - AppleHDA Realtek Audio

[tellicherry]

Thanks very much. Cold start - still no sound with iTunes playing. New IOreg attached

Never connected the front panel to test headphones. Will try connecting them tomorrow.

 

[toleda]

Rules: • Profiles need to contain at least your primary system to assist others with helping you.

still no sound

See Post #1/Problem Reporting; attach all requested files

 

[tellicherry]

Sorry...

Tested as asked - cold start. Still no sound unfortunately.

+++++++++++++++++++++++++++++++++++++++++

Yosemite 10.10.4/ GA-Z68MA-D2H-B3// Intel i5/Intel 3000 graphics
Installed using Multibeast ALC889 selected
IO-reg output attached
DPCI manager won’t launch - sorry

HDMI audio codec(s)
Intel: 0x80862805

Onboard audio codec
Realtek: 0x10ec0889
Name: Realtek ALC889
Audio ID: 1

Valid audio codec, audio device and Audio ID; audio injection is working
Finished

Speakers are Altec Lansing - powered and tested on iPhone
Connected to green jack on the back of the motherboard
Selected Internal Speakers in the Sound control panel

Audio input from USB microphone works fine.

 

[Karthik1234]

Audio problem
Front panel audio ports aren't working. Back panel ports sounds great! When I connect headphones to front panel, Internal speakers doesn't change to Headphones.

Specs
El capitan 10.11.6/Gigabyte H61M DS2(rev 2.2) UEFI F10a/Pentium G630 dual core H61 chipset/Zotac Nvidia GT 610.

Guide used
Patched using cloverALC command(audio_cloverALC-130_v0.1.command).

Rest of the files are attached in the zip.
And BTW, I've connected to both front and back panels. Only back panel seems to work fine.

 

[toleda]

Still no sound unfortunately.

Ignored Post #62; unfortunately, IOReg is not the only requested file.

 

[toleda]

Only back panel seems to work fine.

Front panel hardware problem: conector, cable, AC97, etc.

 

[tellicherry]

Ignored Post #62; unfortunately, IOReg is not the only requested file.

Hopefully i have everything attached this time. Couldn't get DPCImanager to run...

+++++++++++++++++++++++++++++++++++++++++++++++++++++

No audio although devices show up in preferences
Audio was working fine until I launched Audacity yesterday.

Multibeast install

OSX 10.10.4
GA-Z68MA-D2H-B3
Intel Core i5 2600


Altec Lansing speakers
No attached microphone to audio port- although USB microphone from web cam input does work
Selected Internal speakers built in
Selected internal microphone - line in

 

[Karthik1234]

Front panel hardware problem: conector, cable, AC97, etc.

It works fine on windows 10. Not a hardware problem I guess. Any workarounds? Thanks

 

[toleda]

everything attached this time

AppleHDA.kext missing

No audio although devices show up

config.plist is a big problem, lucky the system runs, most selections do not apply.
Edit CLOVER/config.plist/
1. ACPI/DSDT/Fixes/FixHDA/NO
2. ACPI/DSDT/Fixes/AddHDMI/NO
3. ACPI/DSDT/Fixes/FixDisplay/NO
4. ACPI/DSDT/Patches/Rename GFX0 to IGPU/Disabled/YES (no GFX0 is dsdt)
5. ACPI/DSDT/Patches/Rename HECI to IMEI/Disabled/YES (no HECI in dsdt)
6. KernelAndKextPatches/KextsToPatch missing, install
Save, restart, reply with all requested, new files.

 

[toleda]

works fine on windows 10

Windows supports AC97, macOS does not; nothing is the same.

Any workarounds?

See Post #66.