No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

Ok...er, does this mean I must use a DSDT then?

No. The other guy has a codec visible to OS X, you don't. Enable the codec.

 

[hames]

Hi , I have problems with my audio ask for your help because I do not know how to solve it .
My audio device is alc270 , used the Mirone the app to apply the patch , the problem is that the headphone audio is okay , but does not recognize the speaker , but if I reverse the outputs in platforms.xml , have audio in the speaker more does not recognize the headphones do not know if this information helps , but and this way I have the audio speaker ..

Os is Mavericks, and i use clover bootloader with DSDT..

Follow the attachments ..

Tks...

 

[toleda]

used the Mirone the app to apply the patch

Contact developer.
Desktop Only

 

[lysid]

Hi Toleda,
hope you can help me, too. I tried many different configurations, with no luck.
Multibeast Legacy with the F2 Bios works for me mostly, except sound.
Here are my Specs:


1. No output devices
2. OSX 10.11.1, / GA-X79-UP4 - F2 Bios/i7-3930K/Geforce 660Ti 3GB
3. Multibeast 8.0.1 - ALC892
-realtekALC-110 - No audio codec detected
-audio_cloverALC-110 -No audio codec detected

4. attached
5. attached
6. none installed
7. Empty
8. attached
9. No Scripts used
10. -
11. attached

Best
L.

 

[V98I63V]

1. Description of audio problem: No output devices, no sound, double audio device shown in DCIPManager (One has a valid Codec and the other one with same id a NULL one) [this screenshot was taken as soon as I installed the OS, but remains the same after trying everything]
2. OS X version/motherboard model/BIOS version/processor/graphics: El Capitan 11.1.1/P67 Asus Maximus IV Extreme /3604/Intel Sandy Bridge 2600K/NVIDIA GTX 680
3. Copy of IOReg (Tools 2.) or IOJones (Tools 3.), No screenshots
   1. IOReg/File/Save a Copy As…, verify file (no ioreg.txt)
   2. View attachment IOReg.ioreg
4. System/Library/Extensions/AppleHDA.kext View attachment AppleHDA.kext.zip
5. Console/All Messages/kernel Sound Assertions - select/Save Selection As:
6. Screen shots:
   1. DPCIManager/Status (Tools 1.)
   2. System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
7. Terminal/Shell/Export Test As. - audio_realtekALC-100.command View attachment Terminal Saved Output.zip
8. Clover (if installed)
   1. EFI/CLOVER/config.plistView attachment config.plist
   2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES): There's no "Debug", instead there's a "Log" section. It was already set to yes, and misc folder is empty.
      1. or DPCIManager/Misc/Boot Log

 

[nabziF]

Enable the codec.

Ok...how? A setting in Clover perhaps? (In Clover Configurator I see Devices->Audio is blank; should I enter something there before trying anything else?)

I followed your troubleshooting steps in post #1:



1. OS X Version (running 10.10.3)

2. 10.10 and newer/Boot flags​

1. Clover/config.plist​

1. Mandatory Add: config.plist/Boot/Arguments/kext-dev-mode=1 *done* according to Clover Configurator​

2. Remove: Boot/Arguments/npci=0x3000 *done* according to Clover Configurator​

2. HDEF Verification/IORegistryExplorer

1. IOReg/Search: HDEF - I see AppleACPIPlatformExpert/[email protected]/AppleACPIPCI/[email protected]​

2. If IOReg/HDEF present, see 3. Audio_ID verification​

3. Audio_ID verification/IORegistryExplorer

1. Search: HDEF​

2. IOReg/HDEF/layout-id = hex(Audio ID)​

3. Locate: layout-id​

4. Verify layout-id: - I see <00 00 00 00>​

4. Not valid (<00 00 00 00>), select one method and implement​

4. [Guide]-Add HDEF-Clover.pdf (this is what I want, right?)​

[Guide]-Add HDEF-Clover.pdf:
I. IOReg/HDEF Verification

A. IOReg/Search: HDEF - yes it's present, already did this above​

B. If IOReg/HDEF present, see II. IOReg/Audio_ID verification​

II. IOReg/Audio_ID verification

A. Search: HDEF​

B. Locate: layout-id​

C. Verify layout-id: - obviously I still see <00 00 00 00>...​

- <00 00 00 00> not valid - ok what now??? I’m pretty sure my motherboard uses Audio_ID 1, but this is saying not valid…Should I proceed with step IV and enter "1" anyway even though this says not valid? What step did I miss?​

 

[toleda]

tried many different configurations, with no luck.

See Post #1/I. No Output Devices Found/2. HDEF Verification/IORegistryExplorer/3. If no IOReg/HDEF:1. IOReg/Search: @1B
2. Add dsdt/HDEF

 

[toleda]

No output devices, no sound, double audio device shown in DCIPManager (One has a valid Codec and the other one with same id a NULL one)

Bad news, see Post #1/Unsupported/Non working Realtek ALC AppleHDA/3. Asus P8P67 3xxx BIOS: Phantom codec

 

[toleda]

<00 00 00 00> not valid - ok what now??? I’m pretty sure my motherboard uses Audio_ID 1, but this is saying not valid…Should I proceed with step IV and enter "1" anyway even though this says not valid? What step did I miss?

config.plist is a mess, # breaks the tools.
Edit config.plist/Devices/Audio/#Inject/0x0887 to
config.plist/Devices/Audio/Inject/1

 

[lysid]

Hi toleda,
thanks for your support.

1. Added kext-dev-mode=1 again
2. Can’t boot without npci=0x3000/2000 (0x2000 atm)
3. Tried to set dsdt/HDEF with HDEF-Clover method but everything was set correct, already saved it anyway. There is no DSDT for the x79-up4

Here are all steps updated:


1. No output devices
2. OSX 10.11.1, / GA-X79-UP4 - F2 Bios/i7-3930K/Geforce 660Ti 3GB
3. Multibeast 8.0.1 - ALC892
-realtekALC-110 - No audio codec detected
-audio_cloverALC-110 -No audio codec detected

4. attached
5. attached
6. none installed
7. Empty
8. attached
9. No Scripts used
10. -
11. SSDT attached DSDT not installed

Hope this helps you..

Best
L.