No Audio Devices - Realtek ALC AppleHDA [Guide]

[bicar]

Hi Toleda and all. I was wondering if you could help me, I have read this guide. I just hope i've answered the questions correctly. Sorry if I have missed anything obvious.

1.No audio devices appear (No Codec)
2.OS X 10.11 EI Capitan/Laptop:Aorus X5KV4/BIOS version:FB07/i7-5700HQ/GTX965M
3.Used this guide, found no codecs in DCPIManager. Tried unplugging, reboot, etc.
4.Attached.
5.Attached.
6.N/A.
7.Attached.
8.Attached.
9.Attached.
10.N/A.
11.Clover (if installed)

1. Attached.
2. Attached.
3. N/A
4. N/A

Many thanks for your kindly support.

 

[toleda]

1.No audio devices appear (No Codec)

Major issue: No codec, see Post #1. No OS X audio until codec id appears in DPCIManager.
Minor issue: EFI partition was not mounted when script ran.

 

[toleda]

System/Library/Extensions/AppleHDA.kext
There is no kext called AppleHDA or AppleHDAxxx in the extensions folder.

AppleHDA.kext is loading, attach.
Graphics is not working??

 

[stinkdog2008]

AppleHDA.kext is loading, attach.
Graphics is not working??

Well when I went to the folder where the AppleHDA.kext is suppose to be, there is nothing there that is called that.

Graphics is working, but the system definition is off, if that means anything.

I don't get why the sound isn't working. I have gotten the sound to work in 10.6, 10.7, 10.8, 10.9, 10.10, but not 10.11... It makes no sense.

 

[toleda]

there is nothing there that is called that.
Graphics is working, but the system definition is off, if that means anything.
have gotten the sound to work in 10.6, 10.7, 10.8, 10.9, 10.10, but not 10.11... It makes no sense.

Looking in the wrong place.
No kext loaded, graphics is not working (VESA only)
Really, Z97 is not supported in 10.6, 10.7, 10.8 and 10.9 (fix for 10.9.5).

 

[savyas]

enough of that.. finally breaking down and asking for help, after trying just about every method I've been able to find. Perhaps I didn't get one of those methods backed out all of the way, but I've lost count of the number of times I've nuked AppleHDA.kext and re-installed through Pacifist.

No output/input devices found. HDEF shows up in IOJones, but layout-id remains 0, regardless of injection in config.plist.
10.11.1/GA-Z170x-gaming 5/f4c/i5-6600k/intel 530 (currently, one problem at a time)
Procedure/Guide Used - toleda realtek ALC APPLEHDA v2.1Realtek ALC AppleHDA, Post #1)

1. Multibeast - not used
2. Terminal Saved Output - command.out

Copy of IOReg - iojones.out.iojones

System/Library/Extensions/AppleHDA.kext
System/Library/Extensions/AppleHDAxxx.kext (if installed) - N/A
Console/All Messages/kernel Sound Assertions - kernel-sound-assertions.log
Screen shots:

1. DPCIManager/Status (Tools 1.) - DPCIManager.png
2. System Information/Hardware/Audio/Intel High Definition Audio - System_info.png

Terminal/Shell/Export Test As. . . (if script used)

• audio_realtekALC-100.command - command.out

Chimera/Chameleon (if installed) - N/A

Clover (if installed)

1. EFI/CLOVER/config.plist - included
2. or DPCIManager/Misc/Boot Log -- boot.log
3. EFI/CLOVER/ACPI/patched/dsdt.aml (if installed) N/A
4. EFI/CLOVER/ACPI/patched/ssdt.aml (if installed) N/A

 

[toleda]

HDEF shows up in IOJones, but layout-id remains 0, regardless of injection in config.plist.

Clover did not load the audio controller (8086A170), no idea why.
Suggestion:
1. remove config.plist/ACPI/DSDT/Fixes/Rename HDAS to HDEF
2. install ssdt_hdef-1-100-hdas

Reply with new files.

 

[savyas]

Clover did not load the audio controller (8086A170), no idea why.
Suggestion:
1. remove config.plist/ACPI/DSDT/Fixes/Rename HDAS to HDEF
2. install ssdt_hdef-1-100-hdas

Reply with new files.

That did the trick! Thank you so much. Would you care to still see the logs anyway?

 

[stinkdog2008]

Looking in the wrong place.
No kext loaded, graphics is not working (VESA only)
Really, Z97 is not supported in 10.6, 10.7, 10.8 and 10.9 (fix for 10.9.5).

I went ahead and attached screenshots so you can see. I'm pretty sure I'm looking in the right spot?

It took me about an hour after I made the post to get the graphics card to work, but the system recognizes my nVidia GTX 550ti card now, dual monitors. It works. Each monitor is connected with either VGA or DVI, no HDMI on my computer.

I should have reworded what I said. Since I've started hackintosh, I've had audio working (You actually helped me out on my old computer and gave me very detailed step by step help a while ago). This computer I'm using I started since 10.10, which it did work. I just don't get why it is giving so many problems in 10.11.

edit: I fixed my issue using this guide http://www.tonymacx86.com/el-capitan-desktop-guides/174726-guide-asrock-uefi-boot-fix.html

 

[toleda]

pretty sure I'm looking in the right spot?

Nope. System/Library/Extensions, 10.11 hidden file. Search: Finder show hidden files or try ShowAllFiles/Downloads - tonymacx86.com