No Audio Devices - AppleHDA Realtek Audio

[JCMunsonII]

1. Description of audio problem
   
   No standard sound output/input devices displayed
   
   
2. OS X version/motherboard model/BIOS version/processor/graphics
   
   10.13 (Current)/ASUS z270 MAXIMUS IX HERO/(not sure, but newer than original)/i7-7700K/NVidia 1070
   
   
3. Procedure/Guide Used
   
   SIP Disabled, Codec ALC 1220, Audio ID=1
   Removed previous VooDooHDA/Removed all sound parms from Clover config.plist/Restored OEM AppleHDA/Clean boot/MultiBeast 100/200 Series Audio/Ran MacMan's patcher/Reboot/MultiBeast install ALC 1220 audio.
   
   
4. Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (Tools 2.)
   
   Attached.
   
   
5. Terminal/diskutil list - attach Terminal output
   
   Attached.
   
   
6. Installed S/L/E/AppleHDA.kext (10.11 and newer, search: show hidden files)
   
   SS attached.
   
   
7. Screen shots:
   1. DPCIManager/Status (Tools 3.)
   2. System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
   3. System Preferences/Sound/Input
   4. System Preferences/Sound/Output
   
   1: Attached; 2: Not present; 3/4 No devices shown to reference
   
   
8. Terminal/Shell/Export Test As. . . (if script used)
   1. audio_cloverALC-x0.command
   
   N/A
   
   
9. Clover
   1. EFI/CLOVER/config.plist
   2. DPCIManager/Misc/Boot Log (Tools 3.)
   3. EFI/CLOVER/ACPI/Patched/dsdt.aml (if installed)
   4. EFI/CLOVER/ACP/Patched/ssdt(s).aml (if installed)
   
   Attached.
   
   
10. Put all files in a folder, compress and attach to Post
    
    Attached.

Speakers make audible soft pop before log in, but no sound devices present.

Thanks!

 

[toleda]

Installed S/L/E/AppleHDA.kext

Attach the kext, screenshot is not helpful.

 

[wimpy10]

Reason, no HDEF
Install EFI/CLOVER/ACPI/patched/ssdt_hdef-1-no_ioreg:hdef.zip
Restart, reply with new files

Hi Toleda,

I did a clean install and had Install EFI/CLOVER/ACPI/patched/ssdt_hdef-1-no_ioreg:hdef.zip

After this i just changed the RT variables to recommended value, reboot, installed 892 from Multibeast and now I have Audio!!!

Thank you very much!

 

[eduksp]

Problem Reporting - Description, diagnostics, files, screenshots

1. Description of audio problem - No sound
   
2. OS X version/motherboard model/BIOS version/processor/graphics - 10.12.6 (Build 16G29), Bios Uefi according to manual it's SM BIOS 2.7 (in clover configurator: IM183.88Z.0145.B07.1705082121), i7 7700k, GTX 1070 SC2
   
3. Procedure/Guide Used - tried
   - dropped apple hda kext and ocnfig plist in apple hda patcher v1.8, then chose realtek 1220, replaced config plist from the one in the folder Mirone Audio, dropped adummy hda kext in the 10.12 folder, copied hda kext and admmy into kext utility, used multibeast to install realtek 100/200 series, but it didn't work; then I tried this one in portuguese based on yours http://www.hackintoshworld.com/audio-um-guia-pratico/;
   
4. Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (Tools 2.)
5. Terminal/diskutil list - attach Terminal output
6. Installed S/L/E/AppleHDA.kext (10.11 and newer, search: show hidden files)
7. Screen shots:
   1. DPCIManager/Status (Tools 3.)
   2. System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
   3. System Preferences/Sound/Input
   4. System Preferences/Sound/Output
8. Terminal/Shell/Export Test As. . . (if script used)
   1. audio_cloverALC-x0.command
9. Clover
   1. EFI/CLOVER/config.plist
   2. DPCIManager/Misc/Boot Log (Tools 3.)
   3. EFI/CLOVER/ACPI/Patched/dsdt.aml (if installed)
   4. EFI/CLOVER/ACP/Patched/ssdt(s).aml (if installed)
10. Put all files in a folder, compress and attach to Post

 

[toleda]

Procedure/Guide Used - tried

This thread supports three methods, AppleHDA Realtek Audio:

1. cloverALC
2. AppleALC
3. MultiBeast

Remove each failed method. Install one of the above methods.

 

[eduksp]

Ok, I'll try. Is there a safe way to remove these methods I already tried?

 

[JCMunsonII]

Attach the kext, screenshot is not helpful.

Attached per request.

Also, note, sleep is now non-functional. Might, might not, be related.

 

[toleda]

sleep is now non-functional. Might, might not, be related.

Not related to working/non working audio.
Edit config.plist/RtVariables/CsrActiveConfig/0x067 to 0x67
Restart
Terminal:

sudo touch /System/Library/Extensions && sudo kextcache -u /

Restart
Reply with new files.

 

[toleda]

Is there a safe way to remove these methods I already tried?

Clean install.

Otherwise
Restore native AppleHDA [Guide].pdf
Remove any config.plist/KernelAndKextPatches/KextsToPatch/AppleHDA patches
All dummy kexts
etc.

 

[JCMunsonII]

Not related to working/non working audio.
Edit config.plist/RtVariables/CsrActiveConfig/0x067 to 0x67
Restart
Terminal:

sudo touch /System/Library/Extensions && sudo kextcache -u /

Restart
Reply with new files.

Attached.