Need help starting from 10.9.5, should it work ?

[crococroc]

Does not work with just -v, stuck here :
http://image.noelshack.com/fichiers/2014/38/1411308017-screen-shot-2014-09-21-at-14-59-54.png

I will now try -x and then IGPEnabler=No

 

[crococroc]

does not work with -x -v neither, stuck with this, which is different :
http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

does not work with IGPEnabler=No same as previous

I'm stuck again, any idea ?

 

[Adrian B]

does not work with -x -v neither, stuck with this, which is different :
http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

does not work with IGPEnabler=No same as previous

I'm stuck again, any idea ?

Try using

 DropSSDT=No

with -x -v

If you get to the desktop can you run MultiBeast and select Drivers/FakeSMC v6.9.1315
Reboot

 

[RehabMan]

does not work with -x -v neither, stuck with this, which is different :
http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

does not work with IGPEnabler=No same as previous

I'm stuck again, any idea ?

You are unlikely to get any useful replies without detailed hardware specs in your profile.

 

[crococroc]

You are unlikely to get any useful replies without detailed hardware specs in your profile.

Hi, it's in the first post, sorry I'll update my profile asap.

Adrian B> Thanks, but still stuck :

http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

 

[Adrian B]

It's in the first post, sorry I'll update my profile asap.

I would do just that. RehabMan may well have a better idea than I do in how you get this going properly. Update your profile to list CPU model, Motherboard model and graphics model clearly.

 

[crococroc]

done

 

[RehabMan]

Hi, it's in the first post, sorry I'll update my profile asap.

Adrian B> Thanks, but still stuck :

http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

Try with DropSSDT=Yes. And to use your gfx card, you need GraphicsEnabler=No.

 

[crococroc]

Thank you, tried :

DropSSDT=Yes GraphicsEnabler=No -v -x

but still stuck with the same :
http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

Just to say so, the only time I was able to reboot after a multi beast config, it was on my first attempt 3days ago and I used easyBeast instead of DSDT free. But I was only able to boot in safe mode.

 

[RehabMan]

Thank you, tried :

DropSSDT=Yes GraphicsEnabler=No -v -x

but still stuck with the same :
http://image.noelshack.com/fichiers/2014/38/1411308246-screen-shot-2014-09-21-at-15-03-53.png

Just to say so, the only time I was able to reboot after a multi beast config, it was on my first attempt 3days ago and I used easyBeast instead of DSDT free. But I was only able to boot in safe mode.

Try with:
DropSSDT=No GenerateCStates=No GeneratePStates=No -v -x

You may have to get a bit more serious about implementing correct power management: http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html