- Joined
- May 16, 2012
- Messages
- 4
- Motherboard
- GA-Z77X-D3H
- CPU
- i5-3570K
- Graphics
- Firepro V4900
- Mac
- Classic Mac
- Mobile Phone
Hello guys.
I have a Firepro V4900 that I use for CAD on my windows installation.
I've installed OS X 10.8.2 and was able to get my HD4000 to work with GraphicsEnabler=Yes. However, when installed my Firepro V4900 for my windows installation. It messed up my OS X boot. I had to use Graphics Enabler=NO to get it to boot correctly, but OS X does not recognize my HD4000 and I don't get full acceleration. GA-z77x-d3h is my motherboard
This is what I have for sistem configuration.
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Intel Core i5
Processor Speed: 3.40 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: MultiBeast.tonymacx86.com
SMC Version (system): 1.30f3
This is what I get for my Internal Graphics.
Display:
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x0162
Revision ID: 0x0009
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1024 x 768
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
This is what I get for my V4900
Display:
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
Vendor: ATI (0x1002)
Device ID: 0x6749
Revision ID: 0x0000
Kernel Extension Info: No Kext Loaded
I understand that when GraphicsEnabler=Yes the system is using Chimera's loaded graphics drivers. Whereas with GraphicsEnabler=No the system is using apple's graphics drivers.
Everything was working fine before I installed the V4900 Graphics card. Is there a way to prevent system from running this PCIe GPU? I'm lost. Is there some way I can get this setup to work without tossing out my Firepro v4900?
PLEASE HELP!
I have a Firepro V4900 that I use for CAD on my windows installation.
I've installed OS X 10.8.2 and was able to get my HD4000 to work with GraphicsEnabler=Yes. However, when installed my Firepro V4900 for my windows installation. It messed up my OS X boot. I had to use Graphics Enabler=NO to get it to boot correctly, but OS X does not recognize my HD4000 and I don't get full acceleration. GA-z77x-d3h is my motherboard
This is what I have for sistem configuration.
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Intel Core i5
Processor Speed: 3.40 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: MultiBeast.tonymacx86.com
SMC Version (system): 1.30f3
This is what I get for my Internal Graphics.
Display:
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x0162
Revision ID: 0x0009
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1024 x 768
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
This is what I get for my V4900
Display:
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
Vendor: ATI (0x1002)
Device ID: 0x6749
Revision ID: 0x0000
Kernel Extension Info: No Kext Loaded
I understand that when GraphicsEnabler=Yes the system is using Chimera's loaded graphics drivers. Whereas with GraphicsEnabler=No the system is using apple's graphics drivers.
Everything was working fine before I installed the V4900 Graphics card. Is there a way to prevent system from running this PCIe GPU? I'm lost. Is there some way I can get this setup to work without tossing out my Firepro v4900?
PLEASE HELP!
