- Joined
- Jul 18, 2022
- Messages
- 6
- Motherboard
- MSI MAG Z690 Tomahawk WiFi DDR4
- CPU
- i7-12700F
- Graphics
- GT 710
Hi Guys this is my first hackintosh attempt!
I trying to install Big Sur since that's the latest OS supporting the GT710 GPU
Luckily I found this post with a very similar build, so I took off with the EFI of @NorthAmTransAm, made the changes suggested by @danny2305 for enabling onboard wifi and BT support, but I'm stuck at booting the installer.
My error is the same as posted here:
I have the Samsung 980 pro NVMe SSD
What am I missing?
I trying to install Big Sur since that's the latest OS supporting the GT710 GPU
Luckily I found this post with a very similar build, so I took off with the EFI of @NorthAmTransAm, made the changes suggested by @danny2305 for enabling onboard wifi and BT support, but I'm stuck at booting the installer.
My error is the same as posted here:
volume macOS Base System is read-only
Hi guys, I'm new here. So I spent 3 days trying to install Big Sur (Catalina is installed now) Not sure what is certainly stops the install, but I think it caused by "read-only" error. - HID: legacy shim 2 - Generation from SMC report as 2 - macOS Base System is read-only - Loweset level disk...
www.tonymacx86.com
I have the Samsung 980 pro NVMe SSD
What am I missing?
Attachments
Last edited: