***OpenCore 0.8.0 EFI***
A few notes about some custom SSDT's and Patches
- I've edited SSDT-PLUG-ALT to have only the CPU threads I'm using. I renamed it SSDT-PLUG-ALT-12700K.
- I've added a patch labeled (commented) Null \_GPE.DTIN. It prevents a 3 second boot hang that exist when Thunderbolt is enabled in Bios.
- I've included my own USBMap.kext that covers most internal connectors and the back panel I/O. The internal USB 2.0 connection is set to 255 for Bluetooth or USB 2.0 from a Thunderbolt card. No need for any mapping on this build, just follow my guide.
- AirportBrcmFixup.kext is optional.
Note: If you are using the Wifi variant of this board and would like to use your Intel Wifi then you need to remove
AirportBrcmFixup.kext and add the
OpenIntelWireless drivers. OpenCore will not boot with CNVW (onboard Intel Wifi) enabled in BIOS unless you have the driver installed.
Please refer to this chart for graphics cards as you might need to add the boot argument
agdpmod=pikera
Also, please set Intel Speed Step Technology to Enabled in BIOS. Setting to Auto isn't enough.
Lastly, you'll need to add your own Platform Info.