Contribute
Register

Monterey on Asus Tuf Gaming Z590-Plus WiFi, i7-11700K, Radeon RX6600XT

hello if I use your efi, since I have the same motherboard with rx580 nitro, do I have to generate a serial?
 
Last edited:
Yes. Use OCAT (OpenCore Auxiliary tools) to generate an SMBios and update this EFI. an SMBios in MacPro7.1 is possible. I am working on it. For this SMBios, USB 2.0 key required.
sorry I didn't understand what the key usb is for?
while for the rx580 the settings are fine those of the efi in this post?
could you pass me your efi zip file, with a new serial?


this below for Ventura it is ok ?
1674221883467.png
 
Last edited:
Sorry, English is not my language. To start the installation, you need USB 2.0 support, not USB 3. the EFI I offer is for Monterey. For Ventura, we must add the kext AppleIntelI210Ethernet.kext because it is not there. So 2.5G internet does not work without it.
 
Sorry, English is not my language. To start the installation, you need USB 2.0 support, not USB 3. the EFI I offer is for Monterey. For Ventura, we must add the kext AppleIntelI210Ethernet.kext because it is not there. So 2.5G internet does not work without it.
please post your zipped efi for installation...
 
Last edited by a moderator:
Well, normally it's done.
Tinkar56 - thanks for posting. I have a similar system, just a different graphics card and I am using a Fenvi FV-T919 PCI adapter. My system goes to sleep, but wakes up about 30 seconds later. Here are some log captures for Wake Reason. I am running Venura 13.4. Any ideas?



2023-06-16 19:51:04.219044-0700 0x2a5c Error 0x0 93 0 powerd: [com.apple.powerd:sleepWake] PID 766 is not entitled to set wake reason


2023-06-16 19:51:08.412430-0700 0x4ef Default 0x0 254 0 airportd: (IO80211) [com.apple.WiFiManager:] Info: <airport[254]> systemWokenByWiFi: System wake reason: <PEGP PXSX RP10 PXSX RP11 PXSX RP12 PXSX RP13 PXSX RP14 PXSX RP15 PXSX RP16 PXSX PXSX RP02 PXSX RP03 PXSX RP04 PXSX RP06 PXSX R>, was not woken by WiFi
 
Back
Top