Contribute
Register

Mojave i7-3930k CPU at 99%

Status
Not open for further replies.
Joined
Aug 9, 2018
Messages
13
Motherboard
Asus P9X79
CPU
i7-3930k
Graphics
Sapphire Radeon R9 380
Mac
  1. Mac mini
  2. Mac Pro
After succesful hackintosh'ing my pc, i have a problem with my cpu.
It's always at 99% load, and the temp is arround 60c, (with aio cooler).
But, intersting it's that the 99% load it's only showed in the Intel power gadget. Even if i didn't open any process, right after startup.(in the screenshot, it's after 1-2 hours of working, but, it's the same)

What and where is my problem ?

My specs are:
MB:ASUS P9X79
CPU:i7 3930k
GPU: EVGA GTX 670
DSDT:
EHC1 to EH01
EHC2 to EH02
EUSB to EH01
USBE to EH02
SAT0 to SATA
CUU0
CUU1
CUU2
CUU3
EHC0 to EC(disabled)
Fix bug RTC


Boot configs:npci=0x2000 -no_compat_check


Kext and other config are in screenshots below.
Configs:
1586547112097.png1586547315712.png1586547368584.png1586547384164.png1586547394129.png

Temps & load:
1586547441428.png1586547474265.png1586547486105.png
 

Attachments

  • 1586547496577.png
    1586547496577.png
    94.9 KB · Views: 70
...
What and where is my problem ?
...


I'm not 100% sure but to start with consider selecting the PluginType in Clover Configurator. Also check the SSDTs (I'm not familiar with these two).

Plug2.jpg


:)
 
Should i disable these two ?
Edit: i've disabled the SSDT's and started using plugintype, no difference.
 
Last edited:
Any tips ?
i've disabled the SSDT's
I've disabled DSDT CUU0, CUU1, CUU2, CUU3 AND EC0 - to - EC...no difference.
 
Fixed it!
I've followed this tread:
Didn't work.
After i've followed this thread, and everything worked flawlesly, screenshow atached.
P.S: Also, i was needed to change the smbios, but that wasn't a problem.
1586646697262.png
1586646706680.png
 
Status
Not open for further replies.
Back
Top