Unfortunately not, same for Catalina.Same thing on my setup. No proper wake after sleep, only black screen and restart after few sec. Everything ells is working fine. Have you made some progress with this issue @JonnyF12
@JonnyF12, @mango1122 was wondering if any progress made in your quest for a solution. I am having a slightly different wake from sleep issue, but related nonetheless.
Referring to my second build with the ASRock MB, sleep and wake from sleep work flawlessly with UHD630. Regardless if using one or two monitors.
I only starting having an issue the same as yours with a black screen from waking from sleep when I add 2 things in combination. Those 2 things are a UPS and a torrent client. I can use one, or the other, but not both. Still searching for a solution if possible.
Thanks
ThaiGyver
Thanks for the reply. You have given a lot of good info. #1 and #2 are already in place on my system, but I will try #3 from your suggestions. I am normally using a single monitor on DVI and my sleep and wake work without issue. I only started having an issue since adding a UPS and using a torrent client. So, I think it is a clash of different command lines causing a problem. I will try your suggestion and post back if anything has changed.I don't have a straight answer for you. I moved over from my old build to a new one on ASRock z390 iTX and have no sleep issues thus far (with Display port). Working with Intel UHD 630. On HDMI I have very inconsistent behaviour so I kind of gave up. It work fine but after sleeping and waking though 3-4 cycles the screen won't come on. Where I got to was this
1. Make sure the USB port limit patch is there
2. Enable frame buffer patch for the IGPU - "with VRAM as 2048"
3. Try igfxonln=1 on the boot properties with Whatevergreen. Read GitHub for WEG for details. Added igfxonln=1 boot argument and force-online IGPU property force online status for all displays
When the monitor does not come on try switching off and on the monitor - sometimes that seems to solve the issue.
In my new build I already had #1 working perfectly. I applied #2 and #3 - saw some stability with HDMI. Comapred to DP it takes a lot of time to wake from sleep. So ultimately I gave up - I moved to DP and it is stable since then.
Unfortunately, I can't be of much help. If you do find something that works for you - please post the answer.
Good luck !
Thanks for the reply. You have given a lot of good info. #1 and #2 are already in place on my system, but I will try #3 from your suggestions. I am normally using a single monitor on DVI and my sleep and wake work without issue. I only started having an issue since adding a UPS and using a torrent client. So, I think it is a clash of different command lines causing a problem. I will try your suggestion and post back if anything has changed.
Thanks
ThaiGyver
Yes, My sleep and wake work perfectly once again.Thaigyver, Any luck with sleep working?
Thaigyver
I wish I could be of more help to you, I just started learning all this a couple years ago and only have experience with 8th and 9th generation CPU's. Even my first build with the 8th gen CPU with HD630 had no issues with sleep wake. I only added the Graphics Card because I wanted multiple monitors.Great to hear you got it sorted it. I have Catalina and HD530 (6th gen Cpu) graphics which I hear sleep won't work so I was going to update my CPU (7th gen) to get HD630. But I heard that it's a shot in the dark on the 7th gens HD630 sleep working.