Moarfish's build - GA-B75M-D3H i5 3570K

[henryzpb]

Just to let people know, I have the same mobo and did a clean install of Mavericks using Unibeast. My processor is an i7 3770k and I have an MSI Geforce GTX 560 ti twin frozer. I've had no problems whatsoever. In multibeast, I chose "graphicsenabler=yes", "lnx2mac' for internet and used the DSDT from my previous mountan lion install, and also apropriate audio drivers.

I can't tell about HDMI audio because my hdmi port has fried, but it carries normaly from a dual-dvi to hdmi cable.

Could you tell me how did you do that please?

 

[henryzpb]

I have succeeded install Mavericks, below is my MultiBeast Build Configuration screenshot:

 

[BphemiaDrinler]

Could you tell me how did you do that please?

I made a copy of the DSDT which was on my ML install in another partition, and added it to my fresh install of Mavericks trough multibeast. Really simple proccess, really.

 

[Modit]

Did a clean install of Mavericks on my build which is same board but is with the i3-3225 processor all in all everything works the same way as was with ML 10.8.5 except sleep. Sleep seems to be broken on mine with Mavericks, once it falls a sleep i have to restart to get it back up anyone knows a fix for this?

 

[saxmonster]

HI Guys, I have finally found out that I should have selected the USB 3.0 option in MB when I did my original install in July. I am now on 10.8.5 and still have no USB 3.0 working with a usb 2.0 device plugged into it. What am I doing wrong I have tried every version of the GenericUSBHCI kext and got no where. If I leave the 2.0 flash drive in 3.0 slot and reboot it shows up but as soon as I pull it out and reinsert it, it won't mount again. Very weird so what version of genericUSBHCI.kext are you guys using for ML 10.8 .5? I got the usb 3.0 to work in Mavericks but not ML 10.8.5.

TIA

-Scott

 

[Volsmd99]

Another successful install with this motherboard and 10.9/Mavericks.

My config:
1) Core i5 at 3.4 ghz
2) Onboard graphics
3) Generic USB bluetooth adapter

Steps (essentially the same as moarfish detailed above).
1) Create unibeast installer with Multibeast 6.0 and 10.9.
2) Disable all VT related items in BIOS.
3) Boot into unibeast usb drive.
4) Erase and partition drive.
5) Reboot.
6) Run Multibeast
7) DSDTfree
8) Audio - Without DSDT - v100302 current
9) Disk - 3rd Party SATA
10) Network - Realtek Apple RTL1869

Working
1) USB (don't have any USB 3.0 devices but all ports work)
2) Ethernet
3) Wifi Card
4) Sleep
5) Audio (green line out)
6) Dual Monitor setup with HD and DVI
7) Bluetooth (but keyboard does not wake from sleep, never has)
8) iMessage
9) App Store

 

[vIDEObOY]

Another successful install with this motherboard and 10.9/Mavericks.

My config:
1) Core i5 at 3.4 ghz
2) Onboard graphics
3) Generic USB bluetooth adapter

Steps (essentially the same as moarfish detailed above).
1) Create unibeast installer with Multibeast 6.0 and 10.9.
2) Disable all VT related items in BIOS.
3) Boot into unibeast usb drive.
4) Erase and partition drive.
5) Reboot.
6) Run Multibeast
7) DSDTfree
8) Audio - Without DSDT - v100302 current
9) Disk - 3rd Party SATA
10) Network - Realtek Apple RTL1869

Working
1) USB (don't have any USB 3.0 devices but all ports work)
2) Ethernet
3) Wifi Card
4) Sleep
5) Audio (green line out)
6) Dual Monitor setup with HD and DVI
7) Bluetooth (but keyboard does not wake from sleep, never has)
8) iMessage
9) App Store

could you post your multi beast settings ? thanks

 

[Volsmd99]

could you post your multi beast settings ? thanks

Here they are

 

[vIDEObOY]

anyone tried to see if multibeast 6.0.1 fixes usb3 issues here ?

 

[furbies]

anyone tried to see if multibeast 6.0.1 fixes usb3 issues here ?

What USB3 issues are you experiencing ?