Hey Guys,
i've run into a little issue while following this guide and any advice i could get would be amazing.
System
i5 2400
16gb DDR3 @ 1333 <------ removed overclock of 1600 to make sure that wasnt the issue im facing
Maximus V Gene
GS800 PSU
2 x OCZ Agility 3 <------ have tried with and without RAID0
Asus 7950 DCUII <---- currently removed to troubleshoot this problem
Issue:
after flashing the latest bios patch from the guide and setting iGPU to primary with 64mb i can finally get more than just gibberish out of a -v load of the mountain lion installer. But within a couple of seconds of trying to load the machine just restarts... because it happens so quick i am really struggling to see the error thats causing this restart, now i'm not a pro but i've hackintoshed with iboot and multibeast on this machine when it had a Maximus IV Gene-z and all went fine so i've checked the usual culprits; Sata Mode, Turned all overclocks off, internal pl voltage overclock disabled, only connected the drives i want to use and all the rest.
This doesn't seem to be a kernel panic, i've tried -x , -v -x, GraphicsEnabler=No -x -v and i always get the same issue the machine just reboots within a couple of seconds loading.
Am i missing something completely obvious? Should i try with just 8gb ram?
Please help my macbook took a dive off the sofa the other day onto a hardwood floor and died shortly after all i have is my usb with a restored dmg of mountain lion and iboot on cd ....
Again any advice or help i receive would be amazing!
thanks in advance
Edit: Actually with some jiggery pokery i managed to pull a screen shot from a video recording of the boot.... but i still cnt see an issue from the verbose...