Contribute
Register

Mavericks on the 4340s

Status
Not open for further replies.
kpkp said:
You can try this one. Is the vanilla just patched for hdmi audio.
Click to expand...

See post #8. I think antonioj07 may have a Sandy Bridge CPU and therefore HD3000. Because the kext pack claimed to be working is one with the IDs swapped for the Intel MEI device which is expressly for mixed systems. The ProBook Installer does a DSDT patch for this scenario instead of patching kexts.

It is always important to understand for sure what hardware you have. Guessing doesn't cut it.
 
Rehabman, i booted into windows, just to be sure, and as you can see i do have i5 ivy and hd4000

cpu.png

Now, i did as suggested, went back to vanila kexts, and finally got hd4000 working...BUT, the damn graphical glitches do not stop (in launchpad, safari, etc) :(
 
antonioj07 said:
Rehabman, i booted into windows, just to be sure, and as you can see i do have i5 ivy and hd4000

View attachment 70779

Now, i did as suggested, went back to vanila kexts, and finally got hd4000 working...BUT, the damn graphical glitches do not stop (in launchpad, safari, etc) :(
Click to expand...

What is your chipset? Run 'lspci -nn' on Linux Terminal.

Have you extracted and patched your own DSDT (or used the ProBook Installer to patch native DSDT)?
 
I followed the guide to patch my own DSDT...maybe i should o it again...

Here´s what i got running the command:

pcilib: 0000:04:00.0 64-bit device address ignored.
pcilib: 0000:04:00.0 64-bit device address ignored.
pcilib: 0000:00:02.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:0154] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown device [8086:0166] (rev 09)
00:14.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Unknown device [8086:1e3a] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e10] (rev c4)
00:1c.2 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e14] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e16] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e1a] (rev c4)
00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Unknown device [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:1e22] (rev 04)
02:00.0 System peripheral [0880]: JMicron Technology Corp. Unknown device [197b:2392] (rev 30)
02:00.2 SD Host controller [0805]: JMicron Technology Corp. Unknown device [197b:2391] (rev 30)
02:00.3 System peripheral [0880]: JMicron Technology Corp. Unknown device [197b:2393] (rev 30)
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07)
 
antonioj07 said:
I followed the guide to patch my own DSDT...maybe i should o it again...

Here´s what i got running the command:

pcilib: 0000:04:00.0 64-bit device address ignored.
pcilib: 0000:04:00.0 64-bit device address ignored.
pcilib: 0000:00:02.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:0154] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown device [8086:0166] (rev 09)
00:14.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Unknown device [8086:1e3a] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e10] (rev c4)
00:1c.2 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e14] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e16] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation Unknown device [8086:1e1a] (rev c4)
00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Unknown device [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:1e22] (rev 04)
02:00.0 System peripheral [0880]: JMicron Technology Corp. Unknown device [197b:2392] (rev 30)
02:00.2 SD Host controller [0805]: JMicron Technology Corp. Unknown device [197b:2391] (rev 30)
02:00.3 System peripheral [0880]: JMicron Technology Corp. Unknown device [197b:2393] (rev 30)
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07)
Click to expand...

That looks fine. And yes, you should be sure you patched DSDT correctly. Use the ProBook Installer if you're not sure how to do it.

At this point, you should also do a fresh install. And follow the guide as posted.

It is possible you patched your DSDT with 07_MEI_4x40s_Sandy.txt or used 4x40s_SandyBridge.txt.
 
antonioj07 said:
Made a new clean install, avoiding the kext from ox86 this time. I patched my own dsdt again.

Curious thing is that i only managed to activate hd4000 with vanilla kext given by kpkp...however, i still have the graphical glitches :banghead:

What should i do?
Click to expand...

Supposedly kpkp's kext is only patched for HDMI-audio. Have you tried the unpatched vanilla kext that comes with OS X? Have you tried using the ProBook Installer to patch DSDT? Because you haven't explained exactly what DSDT patches you're applying...
 
RehabMan said:
Supposedly kpkp's kext is only patched for HDMI-audio. Have you tried the unpatched vanilla kext that comes with OS X? Have you tried using the ProBook Installer to patch DSDT? Because you haven't explained exactly what DSDT patches you're applying...
Click to expand...


First i used the probook installer to patch the dsdt....then i used my own

Regarding the kexts that come with OSX, i need someone to provide them, because i deleted them from the usb installer :/ Shouldn't i need AppleIntelFramebufferCapri.kext too?
 
antonioj07 said:
First i used the probook installer to patch the dsdt....then i used my own

Regarding the kexts that come with OSX, i need someone to provide them, because i deleted them from the usb installer :/ Shouldn't i need AppleIntelFramebufferCapri.kext too?
Click to expand...

Re-create your Unibeast installer or otherwise extract them from the "Install OS X Mavericks.app"

Yes, AppleIntelFramebufferCapri is the framebuffer for HD4000.
 
Will do, i´ll dowload the installer from the mac App Store again

What about AppleIntelSNBGraphicsFB.kext, should i install it again?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top